COMPARATIVE ENVIRONMENTAL BENEFITS OF LIGHTWEIGHT DESIGN IN THE AUTOMOTIVE SECTOR: THE CASE STUDY OF RECYCLED MAGNESIUM AGAINST CFRP AND STEEL

摘要

A LCA feasibility study was undertaken to determine the environmental impact of an Eco-magnesium process route by recycled chips to manufacture panel for the automotive sector to be compared with comparative scenarios, a non-recycled carbon fiber reinforced polymer (CFRP) and a baseline steel-made component scenario. The objective of this LCA study was to assess the actual benefits of a lightweight solution considering the whole life cycle, including the dirty-phase (i.e. the "cradle-to-exit gate" stage) that impacts differently for the different materials. For this reason the analysis has regarded the net "cradle-to-grave" scenario. Different automotive floor pans were then compared considering the rate of fuel consumption during vehicle operation - i.e. the fuel-mass correlation factor - and the different material substitution factors allowed by the different materials selected.