首页> 外文会议>SPE Liquids-Rich Basins Conference - North America >Gas Velocity-Based Lift Curves for Quantifying Lost Production in Liquid-Rich Permian and Delaware Basin Horizontal Liquids Loaded Wells
【24h】

Gas Velocity-Based Lift Curves for Quantifying Lost Production in Liquid-Rich Permian and Delaware Basin Horizontal Liquids Loaded Wells

机译:基于气体速度的升降曲线,用于量化富含液体的二叠套和特拉华盆地水平液体的储存井

获取原文

摘要

In this continuation work,we expand upon the Nagoo et al.,SPE-190921 [1] seminal paper that unveiled for the first time a simple and direct analytical critical gas velocity diameter-and-inclination-dependent equation for predicting the onset of liquids loading in horizontal wellbores.Using this equation,we now introduce a new analytical method for quantifying lost liquids production in liquids-rich horizontal gassy oil and gas wells undergoing liquids loading.Case studies of in-operation horizontal wells from the Permian and Delaware basins are used to highlight and validate the methodology.For horizontal liquid-rich wells in unconventional plays,liquids loading can severely impair production in gassy oil or gas wells with significant oil or water production.Currently,there is no reliable,fieldfocused,simple-to-use,analytical method for quantifying the lost(or deferred)liquids production because of the liquids loading happening in the wellbore.We propose that the downhole wellbore gas velocity and the critical gas velocity profiles can be superimposed on the traditional wellbore lift curve to yield a varying unloading point on the wellbore lift curve that is very sensitive to and dependent on the predictive reliability of both the diameter-and-inclination-dependent critical gas velocity model used and the wellbore multiphase flow model used.In looking at the new gas velocity-based lift curve results for several horizontal wellbores,the lost liquids production can now be quantified and compared to the actual liquids production drop in the well history before and after the onset of liquids loading.Furthermore,it is demonstrated that as opposed to prior ad hoc recommendations of bottom-of-lift-curve or tangent-of-lift-curve demarcation points for liquids unloading,the new analysis presented provides an analytical intersection point between the downhole wellbore gas and critical gas lift curves as the basis for the unloading point(onset of flow liquids flow reversal point).This signifies that the combination of analytical multiphase flow wellbore and analytical critical gas velocity calculations will now change and define the range of unloading producing rates according to diameter,inclination and fluid property changes.For the first time,a practically useful and simple analytical method for quantifying lost liquids production in liquids loaded horizontal gassy oil and gas wells is presented in the form of gas velocity-based lift curves.This signifies a new powerful arm of horizontal well artificial lift modeling for life-of-well lift optimization(i.e.,incorporating rate declines)for keeping wells flowing at flow rates to avoid liquids loading.Both the lost liquids and lost gas production can be predicted on a well-by-well basis and wells can now be prioritized for artificial lift needs according to their downhole "loading proximity".Various relevant field case studies are used to validate the method in practice.
机译:在这一延续工作中,我们在NAGOO等人的过程中扩展,SPE-190921 [1]首次推出的精细纸,这是第一次推出一种简单而直接的分析临界气体速度直径和倾斜依赖性方程,以预测液体的发作在水平井筒中装载。使用这一方程式,我们现在引入了一种新的分析方法,用于量化富含液体的液体水平的液体井中的液体生产和液体井上液体磨损的液体井。CASE研究来自二叠纪和特拉华盆地的操作内水平井用于突出和验证方法。对于卧式液体丰富的井,在非常规剧中,液体负荷可能会严重损害加油或天然气井中的生产,具有显着的石油或水的生产.CRIBLELLY,没有可靠,常规的,易于稳定的,简单使用,分析方法,用于量化丢失(或延迟)液体生产,因为井筒中发生的液体负荷。我们提出了井下井眼气体速度和临界气体速度曲线可以叠加在传统的井筒升降曲线上,以产生对井筒升降曲线上的不同卸载点,这对直径依赖性临界气体的预测可靠性非常敏感并取决于直径依赖性的临界气体所使用的速度模型和井筒多相流动模型。在看几种水平井筒的新型气体速度升力曲线结果,现在可以量化损失的液体生产,并与井历史上的实际液体生产下降相比在液体造成的液体发作之后。繁殖,结果表明,对于液体卸载的升力曲线或升曲曲线分界点的先前的临时建议,提出的新分析提供了分析交叉点井下井筒气体和临界气体升降曲线之间的点作为卸载点的基础(流动液体流动逆转POI nt)。这意味着分析多相流井筒的组合和分析临界气体速度计算现在将改变并根据直径,倾斜和流体性能发生变化来改变并定义卸载生产率范围。对于第一次,实际上有用和简单用于量化液体损失液体生产的分析方法,载入水平气体油气井是基于气体速度的升力曲线的形式。这意味着一种新的井井人工升力模型的强大手臂,用于钻井升降机优化(即,结合率下降)为了保持流动速率的井,以避免液体载荷。可以在良好的良好良好的基础上预测丢失的液体和丢失的气体生产,现在可以根据其优先考虑人造升力的优先考虑井下“装载接近”。使用相关的现场案例研究用于在实践中验证方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号