首页> 外文会议>International Conference on Innovation in Polymer Science and Technology >Preparation of Zeolite-g-Polyacrylamide using Radiation Induced Grafting and Its Adsorption Isotherms Study on Several Heavy Metal Ions
【24h】

Preparation of Zeolite-g-Polyacrylamide using Radiation Induced Grafting and Its Adsorption Isotherms Study on Several Heavy Metal Ions

机译:使用辐射诱导的沸石 - G-聚丙烯酰胺的制备及其对几种重金属离子的吸附等温度研究

获取原文

摘要

Zeolite-g-polyacrylamide is prepared by using the radiation induced grafting technique.Clinoptilotite,a natural zeolite,is used as the base matrix.In order to increase the degree of grating of polyacrylamide into the zeolite,its surface is modified with silane compound before the grafting reaction and applied a poor solvent method in the grafting reaction,i.e.,a mixture of toluene and H2O.The irradiation doses are varied from 10 to 50 kGy.The grafting parameters are 40% w/w acrylamide,temperature 60 °C and 3 h grafting time.The highest degree of grafting is 93% at an irradiation dose of 25 kGy.The zeolite-g-polyacrylamide is then characterized with FTIR spectroscopy and SEM observation.Batch experiments are also carried out to investigate the adsorption capacity for ion Cr~(3+),Pb~(2+),and Zn~(2+).The maximum adsorption capacities of zeolite-g-polyacrylamide are 544,345,and 1046 mg g-1 for ion Cr~(3+),Pb~(2+),and Zn~(2+),respectively.The equilibrium data are also tested with Langmuir and Freundlich isotherm to find the best suitable adsorption isotherm system.
机译:通过使用辐射诱导的接枝技术制备沸石-G-聚丙烯酰胺。用硅胶,天然沸石作为基础基质。为了将聚丙烯酰胺的光栅增加到沸石中,其表面以前用硅烷化合物改性其表面接枝反应并在接枝反应中施加差的溶剂方法,即甲苯和H2O的混合物。辐照剂量在10至50kGy中变化。接枝参数为40%w / w丙烯酰胺,温度60°C和3 H接枝时间。在25kGy的辐射剂量下,辐射剂量的最高程度为93%。然后用FTIR光谱和SEM观察表征沸石-G-聚丙烯酰胺。还进行了研究,以研究离子的吸附能力Cr〜(3 +),Pb〜(2 +)和Zn〜(2 +)。沸石-G-聚丙烯酰胺的最大吸附能力为544,345,离子Cr〜(3+)的1046mg G-1, PB〜(2 +)和Zn〜(2 +)。平衡数据也用Langmuir A测试ND Freundlich等温线找到最好的合适吸附等温系统。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号