首页> 外文会议>SPE Low Perm Symposium >Modeling PVT Behavior of Gas-Condensate System Under Pore Confinement Effects: Implications for Rate-Transient Analysis of Gas-Condensate Shale Plays
【24h】

Modeling PVT Behavior of Gas-Condensate System Under Pore Confinement Effects: Implications for Rate-Transient Analysis of Gas-Condensate Shale Plays

机译:孔隙限制效应下气凝液系统的模拟PVT行为:气凝液页岩率速率分析的影响

获取原文

摘要

Rate-transient analysis (RTA) is a robust technique for evaluating reservoir/stimulation properties and for forecasting production from shale reservoirs. However, knowledge of fluid storage and flow mechanisms, and controlling rock and fluid parameters, is critical for obtaining meaningful information from RTA. It is common practice to use PVT data measured in laboratories (i.e. bulk fluid properties) for reservoir modeling and production data analysis purposes. These measurement techniques were developed for conventional reservoirs and cannot explain some of the anomalous fluid production behaviors observed for shale gas-condensate wells, such as long-term constant gas/oil ratio (GOR) trends. One explanation for this behavior is that the PVT properties of fluids are affected by confinement in nano-scale pores, and hence deviate from bulk fluid properties. In order to study the effects of pore confinement on fluid properties in shales, the simplified local density (SLD) model is used. The SLD model can be used to estimate fluid density gradients from pore wall to pore center, and therefore explicitly considers pore geometry in adsorption modeling. This model can also be used to adjust the confined fluid critical properties, phase envelope and viscosity. Significant shifts in phase envelope and fluid properties due to pore confinement are observed in this work. Importantly, the corrected equation-of-state predicts a later onset for condensate dropout in shale reservoirs than for bulk systems. The SLD model is also used to estimate adsorbed layer thickness, which in turn is used to modify flow calculations. The corrections for fluid properties, adsorbed layer thickness and non-Darcy flow are then analytically incorporated into transient linear flow analysis of nanoporous shale gas-condensate wells. Analysis of simulated cases using the "corrected" (for pore confinement effects) and "uncorrected" RTA is performed to quantify errors associated with the latter. This study demonstrates that failure to account for pore confinement effects on fluid properties and fluid flow results in errors in linear flow parameter estimation using RTA, but the error depends on the fluid composition, pore size, permeability and pressure. The effects of pore confinement should therefore be considered for proper evaluation of shale gas-condensate reservoirs using analytical or numerical methods.
机译:速率瞬态分析(RTA)是一种用于评估储层/刺激特性的稳健技术,并用于从页岩储层预测生产。然而,了解流体储存和流量机制,以及控制岩石和流体参数,对于从RTA获得有意义的信息至关重要。常见的做法是使用在实验室(I.1.批量流体特性)中测量的PVT数据进行储层建模和生产数据分析目的。这些测量技术是为常规储存器开发的,无法解释对页岩气凝液孔观察到的一些异常流体生产行为,例如长期恒定气/油比(GOR)趋势。这种行为的一个解释是流体的PVT性质受纳米尺度孔的限制影响,因此偏离散装流体性质。为了研究孔隙限制对Shales中的流体性质的影响,使用了简化的局部密度(SLD)模型。 SLD模型可用于估计从孔壁到孔中心的流体密度梯度,因此明确地考虑吸附建模中的孔几何形状。该模型还可用于调节狭窄的流体关键特性,相包络和粘度。在这项工作中观察到由于孔限制而导致的相包膜和流体性能的显着变化。重要地,校正的状态方程预测页岩储层中的冷凝水丢失的后期开始,而不是散装系统。 SLD模型还用于估计吸附层厚度,其又用于修改流量计算。然后将流体性质,吸附层厚度和非达西流体的校正分析到纳米多孔页岩气 - 冷凝物孔的瞬态线性流动分析中。使用“校正”(校正“(用于孔限制效应)和”未校正“RTA的模拟病例分析以量化与后者相关的误差。该研究表明,未能考虑对流体性质和流体流动的孔限制效应导致使用RTA的线性流动参数估计的误差,但误差取决于流体组成,孔径,渗透性和压力。因此,应考虑使用分析或数值方法对页岩气凝液储存器进行适当评估的孔限制的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号