首页> 外文会议>Annual Meeting on Testing and Evaluation of Advanced Materials >Repeatability in Rheological Measurements of Epoxy Resin
【24h】

Repeatability in Rheological Measurements of Epoxy Resin

机译:环氧树脂流变测量中的可重复性

获取原文

摘要

Shear stress-shear strain rate and shear stress-shear time curves of epoxy resin samples with the number average molecular weight of 283 g/mol were measured at 50 癈 under the modes of steady test and transient test, respectively. Effects of dealy time (t_1) and measurement time (t_2) on the shear stress-shear responses of the epoxy resin oligomer material were studied. It was found that the repeatability of the test results at small shear rates was significantly influenced by the delay time and the measurement time. The values of t_1 and t_2 parameters to be used for the steady test of epoxy resin oligomer material could be optimized based upon the transient test. The measurement repeatablity at shear rates smaller than 7 s~(-1) was apparently improved by setting the delay time and the measurement time longer than 20 s seperately {t_1 = 20 s, t_2= 20 s) with the total delay time and the measurement time shorter than 80 s (t_1 + t2= 80s).
机译:在50℃下分别在稳定的试验和瞬态试验模式下在50℃下测量剪切应力 - 剪切应变率和剪切应力 - 剪切时间曲线,其数均分子量为283g / mol。 研究了脱色时间(T_1)和测量时间(T_2)对环氧树脂低聚物材料的剪切应力剪切响应的影响。 结果发现,在小剪切速率下测试结果的可重复性受到延迟时间和测量时间的显着影响。 可以基于瞬态测试优化用于环氧树脂低聚物材料稳定试验的T_1和T_2参数的值。 通过将延迟时间和测量时间设定为单个延迟时间和总延迟时间,显然改善了小于7s〜(-1)的剪切速率下的测量重复性。 测量时间短于80 s(t_1 + t2 = 80s)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号