首页> 外文会议>International Conference on Mechanical, Electronic and Information Technology Engineering >A GDOP-Weighted Intersection Method for Ray-Trace Based Target Localization using AOA Measurements in Quasi-Specular Environment
【24h】

A GDOP-Weighted Intersection Method for Ray-Trace Based Target Localization using AOA Measurements in Quasi-Specular Environment

机译:基于基于射线迹线的GDOP加权交集方法,在准镜面环境中使用AOA测量

获取原文

摘要

Whereas environment modeling of current ray tracing algorithm used for locating is too ideal and the positioning accuracy is not high because AOA based weight intersection method fails to consider singularity bearing line intersection,this paper sets up AOA localization model on quasi-specular condition and proposes a GDOP-weighted intersection method (GWIAOA-RT) for ray-trace based target localization using AOA measurements.The method firstly utilizes idea of cluster to complete tracing propagation paths of multipath signal,gains virtual building surface after revised according to tracing result,constructs image base station,translates non-line-of-sight(NLOS) path into line-of-sight(LOS) path; then utilizes AOA measurements on each path and gets all intersections of bearing line; further utilizes circular error probable (CEP) to determine effective intersections,gives corresponding weight according to Geometric Dilution of Precision (GDOP) of effective intersections,and weighted merge them to estimate the position of target.The method utilizes multipath signal to eliminate the impact of NLOS noise on positioning accuracy as well as consideration of position error of image base station in GDOP calculation.It has strong robustness.Simulation result shows that compared with existing methods,GWIAOA-RT method has higher positioning accuracy and better adaptation in different application scenarios.
机译:虽然用于定位的电流射线跟踪算法的环境建模是过于理想的,但定位精度不高,因为基于AOA的重量交叉方法未能考虑奇点轴承线路点,所以本文建立了准镜面状况的AOA定位模型,提出了一个基于GDOP加权的交集方法(GWIAOA-RT)使用AOA测量的基于射线迹线的目标定位。方法首先利用集群的概念来完成多径信号的追踪传播路径,根据跟踪结果进行修改后获得虚拟建筑表面,构造图像基站,将非视线(NLOS)路径转换为视线(LOS)路径;然后利用每个路径上的AOA测量并获得轴承线的所有交叉点;进一步利用循环误差可能(CEP)以确定有效的交叉点,根据有效交叉点的精度(GDOP)的几何稀释,给出相应的重量,并且加权合并它们来估计目标位置。该方法利用多径信号来消除影响的影响NLOS噪声对GDOP计算中的图像基站位置误差的考虑。它具有强大的鲁棒性。仿真结果表明,与现有方法相比,Gwiaoa-RT方法具有更高的定位精度和不同应用方案的更好适应。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号