首页> 外文会议>Annual International Meeting of the American Society of Agricultural and Biological Enginners >Mathematical modeling of deposit removal from stainless steel pipeline during cleaning-in-place of milking system with electrolyzed oxidizing water
【24h】

Mathematical modeling of deposit removal from stainless steel pipeline during cleaning-in-place of milking system with electrolyzed oxidizing water

机译:电解氧化水清洗后不锈钢管道沉积物去除沉积物的数学建模

获取原文

摘要

The safety of raw milk depends on a clean milking system during the milk production. The milking system cleaning widely used on dairy farms is a highly automated process called cleaning-in-place (CIP), comprising of: i) warm water rinse; ii) alkalinewash; Hi) acid wash; and iv) sanitizing rinse before the next milking event. Electrolyzed oxidizing (EO) water is an emerging technology, which consists of acidic and alkaline solutions produced by the electrodialysis of dilute sodium chloride solution.Previous studies showed that EO water can be an alternative cleaning solution for milking system CIP. Despite the progress made to enhance the CIP performance, the mechanisms behind the ^leaning processes were still largely unclear. Therefore, this studywas undertaken to evaluate the deposit removal rate during the EO water CIP using a stainless steel surface evaluation simulator. Deposit removal data from the simulator formed the basis for developing mathematical models. Stainless steel straight pipespecimens were placed at the end of undisturbed entrance length along the simulator pipeline. The weight of milk deposits on the inner surfaces of the specimens was measured after the initial soiling, and then after certain time durations within the warmwater rinse, alkaline wash, and acid wash cycles. A unified first order deposit removal rate model dependent on n power of remaining deposit mass was proposed for all three cycles. Experimental results showed that the milk deposit on the inner surfacesof the specimens was removed rapidly by the warm water rinse within 10 s of rinse time. For the alkaline and acid wash cycles, the co-existence of a fast deposit removal at the beginning of the wash cycle and a slow deposit removal throughout the entirewash cycle were inferred. The developed models fit the experimental data well with small root mean sguare errors and percent error differences.
机译:原料牛奶的安全取决于牛奶生产过程中的清洁挤奶系统。广泛使用的乳制品农场的挤奶系统清洁是一种典型的自动化过程,称为就地清洁(CIP),包括:i)温水冲洗; ii)碱性洗涤;嗨)酸洗;和iv)在下一个挤奶事件前消毒冲洗。电解氧化(EO)水是一种新兴技术,由稀氯化钠溶液的电渗析产生的酸性和碱性溶液组成。前一种研究表明,EO水可以是用于挤奶系统CIP的替代清洁溶液。尽管提高了CIP绩效的进展,但^倾斜过程背后的机制仍然很大程度上不清楚。因此,使用不锈钢表面评估模拟器,本研究旨在评估EO水CIP期间的沉积物去除率。 Simulator中的存款删除数据形成了开发数学模型的基础。不锈钢直接管道沿着模拟器管道置于未受干扰的入口长度的末端。在初始污染后测量样品内表面上的牛奶沉积物的重量,然后在Warmwater漂洗,碱性洗涤和酸性洗涤循环内进行一定的时间持续时间。为所有三个循环提出了一种依赖于剩余沉积物N功率的统一第一订单沉积速率模型。实验结果表明,在漂浮时间10秒内通过温水冲洗液相快速除去样品的内表面上的牛奶沉积物。对于碱性和酸性洗涤循环,推断出在洗涤循环开始时快速沉积物的共存以及在整个循环循环中进行缓慢的沉积物去除。开发模型适合实验数据,具有小的根均值误差和误差差异。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号