首页> 外文会议>Symposium on Rare Metal Extraction and Processing >Effect of Sulfuric Acid Concentration on Marmatite Dissolution in the Presence of Cupric Ions
【24h】

Effect of Sulfuric Acid Concentration on Marmatite Dissolution in the Presence of Cupric Ions

机译:硫酸浓度对铜离子存在下铁闪锌矿溶解的影响

获取原文

摘要

Marmatite often associates with copper sulfide ore with the role of Cu~(2+) in marmatite dissolution being important in hydrometallurgy. In this work, we found that cupric ions (Cu~2) can accelerate marmatite dissolution significantly at high temperature, regardless of sulfuric acid concentration (pH 0.5-2.5). Marmatite dissolved faster at lower acid concentrations and compared with cupric-free conditions, and the concentration of zinc dissolved in the presence of Cu~(2+) ions increased by 5500 mg/L. When the acid concentration was high (pH above 2.5), the acceleration effect of high Cu~(2+) concentration was more obvious. In addition, the consumption of Cu~(2+) was low at high acid concentration (pH below 1.5), but Cu~(2+) consumption increased significantly at low acid concentration (pH above 2.5). X-ray diffraction (XRD) of the leaching residues proved that no copper-containing mineralogical phase was produced at high acid concentration, but copper-containing products were formed at low acid concentration. Kinetic analysis showed that marmatite dissolution was mainly controlled by surface reaction. The reaction between Cu~(2+) and marmatite should be different at different concentrations of sulfuric acid.
机译:铁闪锌矿常与硫化铜矿伴生,铜离子在铁闪锌矿溶解中的作用在湿法冶金中非常重要。在这项工作中,我们发现,无论硫酸浓度(pH 0.5-2.5)如何,铜离子(Cu~2)都能在高温下显著加速铁闪锌矿的溶解。铁闪锌矿在较低的酸浓度下溶解速度较快,与无铜条件下相比,在Cu~(2+)离子存在下溶解的锌浓度增加了5500 mg/L。当酸浓度较高(pH值高于2.5)时,高Cu~(2+)浓度的加速效应更为明显。此外,在高酸浓度(pH值低于1.5)下,Cu~(2+)的消耗较低,但在低酸浓度(pH值高于2.5)下,Cu~(2+)的消耗显著增加。浸出渣的X射线衍射(XRD)表明,在高酸浓度下不会产生含铜矿物相,但在低酸浓度下会形成含铜产物。动力学分析表明,铁闪锌矿的溶解主要受表面反应控制。在不同的硫酸浓度下,Cu~(2+)与铁闪锌矿的反应应该是不同的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号