首页> 外文会议>Modeling Aspects in Optical Metrology >Analysis of OSNR Requirements for Higher Modulation Schemes for Various Local Oscillator Powers
【24h】

Analysis of OSNR Requirements for Higher Modulation Schemes for Various Local Oscillator Powers

机译:各种本地振荡器功率的更高调制方案的OSNR要求分析

获取原文

摘要

To meet the growing demands of data traffic in long haul communication, it is necessary to efficiently use the low-loss region(C-band) of the optical spectrum, by increasing the no. of optical channels and increasing the bit rate on each channel. But narrow pulses occupy higher spectral bandwidth. To circumvent this problem, higher order modulation schemes such as QPSK and QAM can be used to modulate the bits, which increases the spectral efficiency without demanding any extra spectral bandwidth. On the receiver side, to meet a satisfy, a given BER, the received optical signal requires to have minimum OSNR. In our study in this paper, we analyses for different modulation schemes, the OSNR required with and without preamplifier. The theoretical limit of OSNR requirement for a modulation scheme is compared for a given link length by varying the local oscillator (LO) power. Our analysis shows that as we increase the local oscillator (LO) power, the OSNR requirement decreases for a given BER. Also a combination of preamplifier and local oscillator (LO) gives the OSNR closest to theoretical limit.
机译:为了满足长途通信中日益增长的数据流量需求,有必要通过增加NO的光谱有效地使用光谱的低损耗区域(C波段)。光学通道并增加每个通道上的比特率。但窄脉冲占据更高的光谱带宽。为了避免这个问题,可以使用QPSK和QAM等更高的调制方案来调制比特,这增加了频谱效率而不要求任何额外的谱带宽。在接收器侧,为了满足满足,给定BER,所接收的光信号需要最小的OSNR。在本文的研究中,我们分析了不同的调制方案,需要和不使用前置放大器的OSNR。通过改变本地振荡器(LO)功率来比较调制方案对调制方案的理论极限。我们的分析表明,随着我们增加本地振荡器(LO)电源,OSNR要求减少给定的BER。此外,前置放大器和本地振荡器(LO)的组合给出了最接近理论极限的OSNR。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号