首页> 外文会议>International Conference on Materials Science and Engineering >Effects of electrolyte parameters on properties of ceramic coatings formed on aluminum alloy 7075 by plasma electrolytic oxidation
【24h】

Effects of electrolyte parameters on properties of ceramic coatings formed on aluminum alloy 7075 by plasma electrolytic oxidation

机译:电解质参数对等离子电解氧化在铝合金7075上形成的陶瓷涂层性能的影响

获取原文

摘要

Four electrolyte (aluminate, silicate, borate and phosphate) solutions were optimized for using in surface treatment of 7075 aluminum alloy by plasma electrolytic oxidation. Microstructure, phase composition and corrosion resistance of ceramic coatings on the surface were analyzed by SEM, X-ray diffraction as well as electrochemical work station. It was showed that ceramic coatings prepared in aluminate solution had excellent continuity, compact structure with micro hardness of HV0.1 1100. The major portion of all coatings consisted of γ-Al_2O_3 and bits of α-Al_2O_3, the corrosion potential was increased by a small extent while the corrosion current density was significantly reduced.
机译:通过等离子体电解氧化优化了4075铝合金表面处理的四种电解质(铝酸盐,硅酸盐,硼酸盐和磷酸盐)溶液。通过SEM,X射线衍射和电化学工程分析了表面上陶瓷涂层的微观结构,相相组成和耐腐蚀性。结果表明,在铝酸盐溶液中制备的陶瓷涂层具有优异的连续性,具有HV0.1 1100的微硬度的紧凑结构。所有涂层的主要部分由γ-Al_2O_3和α-Al_2O_3的比特组成,腐蚀电位增加了小程度,而腐蚀电流密度显着降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号