首页> 外文会议>International Conference on Applied Mechanics, Materials and Manufacturing >Study on transverse shear behavior of CFRP sandwich structure with M - pattern folded core
【24h】

Study on transverse shear behavior of CFRP sandwich structure with M - pattern folded core

机译:CFRP夹心结构与M - 图案折叠芯的横向剪切行为研究

获取原文

摘要

In order to solve the problem of the face/core bonding performance of the sandwich structure, this paper proposed a M-pattern folded sandwich structure. Structural performance in direct (pure) shear was investigated for sandwich structure. FE-Analytical of sandwich structure strength under shear loading condition was presented for possible failure modes. Panels with core of different thickness were tested for different failure modes and the mechanical properties. In general, the measured failure loads showed good agreement with the FE-analytical predictions. The results shown that failure modes of the sandwich structure with low relative density were shear buckling and fracture of thin-walled of cores, respectively. For the sandwich structure with high relative density, the dominant failure mode was interfacial debonding of face/cores, and the initiating failure along the ends of the specimens.
机译:为了解决夹层结构的面/芯键合性能的问题,本文提出了一种折叠夹层结构的M模式。研究了夹层结构直接(纯)剪切的结构性能。出现了剪切负载条件下的夹层结构强度的Fe分析,以获得可能的失效模式。测试具有不同厚度核心的面板,用于不同的故障模式和机械性能。通常,测量的故障负载显示与FE分析预测吻合良好。结果表明,具有低相对密度的夹层结构的失效模式分别是芯片的剪切屈曲和薄壁骨折。对于具有高相对密度的夹层结构,主导故障模式是面部/芯的界面剥离,以及标本末端的启动失败。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号