首页> 外文会议>SAE International Powertrains, Fuels Lubricants Meeting >Comparison and Sensitivity Analysis of Turbulent Flame Speed Closures in the RANS G-Equation Context for Two Distinct Engines
【24h】

Comparison and Sensitivity Analysis of Turbulent Flame Speed Closures in the RANS G-Equation Context for Two Distinct Engines

机译:两种不同发动机RAN G型方程上下文中湍流火焰速度闭合的比较与敏感性分析

获取原文
获取外文期刊封面目录资料

摘要

Three-dimensional reactive computational fluid dynamics (CFD) plays a crucial role in IC engine development tasks complementing experimental efforts by providing improved understanding of the combustion process. A widely adopted combustion model in the engine community for (partially) premixed combustion is the G-Equation where the flame front is represented by an iso-level of an arbitrary scalar G. A convective-reactive equation for this iso-surface is solved, for which the turbulent flame speed S_T must be provided. In this study, the commonly used and well-established Damkohler approach is compared to a novel correlation, derived from an algebraic closure for the scalar dissipation of reaction progress as proposed by Kolla et al. [1]. The predictions from the two correlations are probed towards their sensitivities by means of experimental data from two distinctly different engine configurations: 1) a lean burn spark ignition natural gas engine for power generation, derived from a flat head/bowl-in piston compression ignition engine with roughly two liters of displacement per cylinder, and, 2) a small bore 250 cc single cylinder port fuel injected gasoline engine with a typical four-valve pent roof arrangement. The sensitivity of the flame speed closures towards the in-cylinder turbulent flow field is investigated for a sweep in turning speed for both engines close to full load. The numerical predictions in terms of pressure trace as well as heat release rates for both engines are compared to experimental test bench data and the predictive capabilities of the proposed closures for the two considerably different engine scales are studied. Additionally, the impact of two different RANS turbulence models (k-ε RNG and standard k-ω) on the results is discussed. The combustion regime is further classified in the Borghi diagram throughout the combustion event, where the flame speed closures are further investigated with emphasis on the early and late combustion stages.
机译:三维反应计算流体动力学(CFD)在IC发动机开发任务中起着至关重要的作用,通过提供改进对燃烧过程的理解来补充实验努力。用于(部分)预混燃烧的发动机群落中广泛采用的燃烧模型是燃烧前沿由任意标量G的ISO级表示的G型。必须提供湍流速度S_T。在这项研究中,常用和良好的Damkohler方法与源自kolla等人提出的反作用进展的代数闭合来进行比较。 [1]。通过两种明显不同的发动机配置的实验数据探讨了两种相关性的预测:1)用于发电的瘦燃烧火花点火天然气发动机,源自平板/碗式活塞压缩点火发动机每缸大约两升位移,2)小孔250 CC单缸端口燃料注入汽油发动机,具有典型的四瓣吊顶装置。研究了朝向缸内湍流流场的火焰速度闭合的灵敏度,以扫描速度,用于靠近满载的两个发动机。将压力迹线以及两个引擎的热释放速率的数值预测与实验测试台数据进行比较,并且研究了两个相当不同的发动机尺度的所提出的封闭件的预测能力。另外,讨论了两种不同的RAN湍流模型(K-εrng和标准K-ω)对结果的影响。在整个燃烧事件中进一步分类燃烧制度,其中进一步研究了火焰速度闭合,重点是早期和晚燃烧阶段。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号