首页> 外文会议>International Conference on Aluminum Alloys >Effect of Annealing Condition on Earing and Texture Formation in Cold Rolled AA5182 Aluminum Alloy
【24h】

Effect of Annealing Condition on Earing and Texture Formation in Cold Rolled AA5182 Aluminum Alloy

机译:冷轧AA5182铝合金在冷轧AA5182铝合金耳线和纹理形成的影响

获取原文

摘要

The effect of annealing condition on earring and recrystallization texture formation in cold rolled AA5182 aluminum alloy was investigated. The earring of AA5182 aluminum alloy depends strongly on the heating rate. At low heating rate (0.01~1 K/s) the ears on drawn cup situated at 45 deg to the sheet rolling direction. At high heating rate (10 K/s) the ears were lower. The earring behavior was characterized by the texture components. As the heating rate increases, the intensity of cube component increases whereas the intensities of Brass, Cu and SB components decrease. The transformation kinetics of recrystallization during isothermal annealing was quantified by the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. The results show that the JMAK exponent for recrystallization was determined to be 2.4 at 553 K and around 4 at 573 K and 593 K. The apparent activation energy for recrystallization was estimated to be 203 kJ/mol.
机译:研究了对冷轧AA5182铝合金耳环和再结晶纹理形成的退火条件的影响。 AA5182铝合金的耳线强烈依赖于加热速率。 在低加热速率(0.01〜1 k / s)绘制杯子上的耳朵位于45°至纸张滚动方向。 在高加热速率(10 k / s),耳朵较低。 耳环行为的特征在于纹理组件。 随着加热速率的增加,立方体组分的强度增加,而黄铜,Cu和Sb组分的强度降低。 Johnson-Mehl-Avrami-Kolmogorov(JMAK)方程量化了等温退火期间重结晶转化动力学。 结果表明,将用于重结晶的JMAK指数在573k和593k下测定为2.4,约为4.4,估计用于重结晶的表观活化能量为203kJ / mol。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号