The effect of the addition of oxygen on the formation of microstructure cooled from the β phase of Ti-Fe alloy was examined. The alloy ingots of Ti-(4, 5, 6, 7, 8, 9 and 10) at.% Fe and Ti-8 at.% Fe-(1 and 3) at.% o were arc-melted. They were homogenized at 1200 °C for 3.6 ks and then hot-rolled at 850 °C into 1.5-mm thick sheets. The disk specimen was fabricated and then put in the differential thermal analysis (DTA) apparatus. The disk in the DTA was heated at 1000 °C for 0.6 ks in the β phase and then cooled to room temperature at a rate of 50 °C/min. The microstructure was examined by an optica! microscope after the DTA experiment. In the Ti-(7 and 8) Fe alloys the ω phase formed during cooling. The addition of oxygen in the Ti-8Fe alloy promoted the β→α transformation. Furthermore, the addition of one at.% oxygen in the Ti-8Fe alloy promoted β→ω_i transformation, while the addition of three at.% oxygen suppressed the β→ω_i transformation during cooling.
展开▼
