首页> 外文会议>ACM International conference on hardware/software - codesign and system synthesis >COOL: Oontrol-based Optimization Of Load-balancing for Thermal Behavior
【24h】

COOL: Oontrol-based Optimization Of Load-balancing for Thermal Behavior

机译:COOL:基于Oontrol的热行为负载平衡优化

获取原文

摘要

The thermal behavior of on-chip systems is crucial in order to maintain a reliable operation throughout its lifetime. Potential thermal hotspots like, for example, register files are particularly responsible for unreliable behavior and have therefore been the focus of related research. Within this paper we demonstrate that a pro-active thermal strategy is necessary in order to avoid thermal hotspots by performing load balancing - in regards to the temperature produced by the computational load - through the means of activity migration. We have found that extremum-seeking control is a powerful way to achieve this goal because of its properties that are tailored to the thermal management problem. Our work deploys a thermal camera that captures the infrared emissions from the silicon wafer of an FPGA chip enabling us to accurately analyze and evaluate the impact of our load balancing approach with respect to the chip's thermal behavior. The obtained reduction of peak temperature is 9°C and the reduction in thermal spatial variation is from 6°C to 1°C. We additionally apply extremum-seeking control to the register file of a superscalar ASIC microarchitecture. Our results using thermal simulation show on average a 13°C (up to 21°C) reduction of peak temperature in the register file while exhibiting a 49% reduction in thermal spatial variation compared to State-of-the-Art while incurring an average performance penalty of 1.4% but without increasing the area footprint of the register file.
机译:片上系统的热行为是为了在其整个使用寿命期间维持可靠运行的关键。潜在的热的热点等,例如,寄存器文件都是不可靠的行为负责,而且因此已经相关研究的重点。内本文中,我们证明了一种主动热策略是必要的,以便避免通过执行负载平衡的热热点 - 通过活动迁移的装置 - 通过计算负荷产生的温度在问候。我们已经发现,极值寻求控制实现的,因为它的属性以便针对热管理问题这一目标的有效途径。我们的工作部署的热相机捕捉从FPGA芯片的硅晶片的红外辐射,使我们能够准确地分析和评估我们的负载均衡方法相对于芯片的热行为的影响。所获得的峰值温度的降低是9℃,在热的空间变化的减小是从6℃至1℃。我们还采用极值寻求控制到超标量ASIC微架构的寄存器文件。使用平均热模拟显示我们的结果13℃(最高21℃)在寄存器文件还原峰温度的同时表现出在热的空间变化的减少49%相比,国家的最先进而引起的平均的1.4%,但不增加寄存器文件的区域足迹的性能损失。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号