首页> 外文会议>ICMMT 2012 >A Study on the Electrical Silicon Sheet Punch Wear Machined by W-EDM

【24h】

A Study on the Electrical Silicon Sheet Punch Wear Machined by W-EDM

机译：W-EDM加工电气硅片冲床的研究

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

The effect of using Cr12MoV steel made by Wire Electrical Discharge Machining (W-EDM) for electrical silicon sheet punches was characterized and investigated. The surface roughness and HRC of the samples so prepared was examined. Wear resistance of the Cr12Mov for punch by W-EDM treatment was assessed by measurement of weight method. The results show that the W-EDM parameters influence the punches' wear resistance and wear weight loss was influenced by hardness loss greatly.

机译：使用CR12MoV钢通过用于电硅片冲孔的电线电放电加工（W-EDM）制造的效果。检查了如制备的样品的表面粗糙度和HRC。通过测量重量法评估通过W-EDM处理进行CR12MOV的耐磨性。结果表明，W-EDM参数影响冲头的耐磨性和耐磨减肥受硬度损失的影响。

著录项

来源
《ICMMT 2012》|2012年||共4页
会议地点
作者
LIU Cunping; YUAN Yongfu; YANG Yu; LIU Yong;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 71.22083;
关键词
W-EDM; electrical silicon sheet; punch wear;

机译：W-EDM;电气硅片;打磨磨损;

相似文献

外文文献
中文文献
专利

1. Consideration of ferromagnetic anisotropy in electrical machines built of segmented silicon steel sheets [J] . Mueller Fabian, Bavendiek Gregor, Leuning Nora, Science, Measurement & Technology, IET . 2020,第3期

机译：对电机芯片制成的铁磁各向异性的考虑 - 分段硅钢板
2. Anisotropy of Losses in Non-Oriented Iron Silicon Sheets: Influence on Electrical Machine Applications [J] . Hamrit Oussama, de la Barriere Olivier, LoBue Martino, Magnetics, IEEE Transactions on . 2016,第2期

机译：非取向铁硅片的损耗各向异性：对电机应用的影响
3. Discussion on ????????The measurement of interlaminar resistance of varnish-insulated silicon-steel sheet for large electrical machines???????? before the North-Eastern Radio and Measurements Group, at Newcastle upon Tyne, 21st January, 1952 [J] . Proceedings of the IEE - Part II: Power Engineering . 1953,第77期

机译：关于大型电机用清漆绝缘硅钢片的层间电阻的测量的讨论1952年1月21日，在泰恩河畔纽卡斯尔的东北无线电和测量组之前
4. A Study on the Electrical Silicon Sheet Punch Wear Machined by W-EDM [C] . LIU Cunping, YUAN Yongfu, YANG Yu, ICMMT 2012 . 2012

机译：W-EDM加工电气硅片冲床的研究
5. Friction studies in punch stretching of metal sheets [D] . Senthilnathan, Valliappan 1995

机译：金属板冲孔拉伸中的摩擦研究
6. Analysis of the Influence of Blanking Clearance on the Wear of the Punch the Change of the Burr Size and the Geometry of the Hook Blanked in the Hardened Steel Sheet [O] . Jacek Mucha, Jacek Tutak 2019

机译：冲裁间隙对冲孔磨损毛刺尺寸变化和淬硬钢板冲孔钩几何形状的影响分析
7. Magnetic Properties and Machinability of Non-oriented Electrical Steel Sheets with Good Punchability and Machinability [O] . Mitsuyo Doi, Hiroyoshi Yashiki, Yasutaka Okada 1999

机译：具有良好的可冲洗性和可加工性的非导向电钢板的磁性和加工性
8. Design Criteria for Wear Testing Machines. 1. Physical Mechanics: Design Criteria for Existing Wear Testing Machines. 2. Applied Mechanics: Application of Design Criteria to Existing Wear Testing Machines [R] . Vichard, J. P., Godet, M. 1981

机译：磨损试验机的设计标准。 1.物理力学：现有磨损试验机的设计标准。 2.应用力学：设计标准在现有磨损试验机上的应用

A Study on the Electrical Silicon Sheet Punch Wear Machined by W-EDM

摘要

著录项

相似文献

相关主题

期刊订阅