Droplet Generation and Piezoceramic Actuation of a Jetting inker

摘要

To reveal the jetting of fine drops, model of 2-phase flow between gas and liquid is offered based on volume of fluid method. Numerical simulation is launched for the droplet generation through narrow nozzle, and key factors are discussed. Aiming at the ink marking of defective dies in IC production, a jetting inker driven by piezoceramic stacks is developed. The actuation properties are derived;;waveform of induced pressure at nozzle entrance is estimated, which coincides the numerical results. Performance of ink dot jetting is evaluated and simulation results are verified.