首页> 外文会议>International Conference on Manufacturing Science and Engineering >Effect of Forming Pressure and Sintering Temperature on Thermal Expansion Property of Li_2O-Al_2O_3-P_2O_5-SiO_2 Glass-Ceramics
【24h】

Effect of Forming Pressure and Sintering Temperature on Thermal Expansion Property of Li_2O-Al_2O_3-P_2O_5-SiO_2 Glass-Ceramics

机译:形成压力和烧结温度对Li_2O-Al_2O_3-P_2O_5-SiO_2玻璃陶瓷热膨胀性能的影响

获取原文

摘要

Li_2O--Al_2O_3-P_2O_5-SiO_2 xerogel powders were synthesized by sol-gel route and glass-ceramics were prepared under different forming pressure and sintering temperature. The effects of sintering temperature and forming pressure on coefficient of thermal expansion of prepared glass-ceramics were investigated by means of DTA-TG, TEC and XRD. The results indicate that xerogel powders crystallization begins at 785°C, and the main crystallite phases in the researched specimens are virgilite and cristobalite. The TEC decreases linearly with the forming pressure. When the sintering temperature is 950°C and forming pressure is 40MPa, a low TEC of 0.65 x 10~(-6) °C~(-1) can be obtained.
机译:通过溶胶 - 凝胶途径合成Li_2O - Al_2O_3-P_2O_5-SiO_2 Xerogel粉末,并在不同的成形压力和烧结温度下制备玻璃陶瓷。通过DTA-TG,TEC和XRD研究了烧结温度和成形压力对制备玻璃陶瓷的热膨胀系数的影响。结果表明,Xerogel粉末结晶在785℃开始,研究的样本中的主要微晶相是维吉岛和ristobalite。 TEC随着成形压力线性降低。当烧结温度为950℃并形成压力为40MPa时,可以获得低于0.65×10〜(-6)℃〜(-1)的低TEC。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号