Anti - glare device for car based on Single Chip Microcomputer

摘要

Because the car headlamp light intensity is too large and it leads to accidents, This paper is based on the initiative to reduce the light intensity of their vehicles according headlights glare or close the high beam and open the lamp method, to achieve the purpose of the glare. The system is AT89C51 microcontroller as the core control, use of photodiode sensor to induction opposite the car headlights light intensity, when opposite car headlights light intensity up to a certain value, photodiode get a signal to the microcontroller, and then microcontroller sends a signal, to control buzzer sound or not. When the buzzer sounded, using DAC0832 chip to control the brightness of the light emitting diode or control the light on and off and low beam enabled. When enabled for dipped beam, has been more than the antiglare range; after the scope enabled high beam, in order to achieve the anti-dazzle cycle. Through practice, the system has reached the anti-dazzle purpose and has practical value.