首页> 外文会议>International Conference on Advances in Materials and Manufacturing Processes >The Effect of Calculating Gridding Size on the Formation of Multimode Penetrator
【24h】

The Effect of Calculating Gridding Size on the Formation of Multimode Penetrator

机译:网格尺寸对多模渗透器形成的影响

获取原文

摘要

Aim at the problem of Ansys/LS-DYNA software simulating in the shaped charge modeling, this paper studies the influence of calculating gridding size on the multimode penetrator forming. It can be found that when the gridding size is 0.028 times the charge caliber or less, the formation of penetrator can be good with the trail result. It obtained the change curve of the model nodes and the calculating time of certain computer with the size of gridding. When the gridding size is from 0.022 to 0.028 times the charge caliber, the model nodes diminish 30.8%, and the calculating time decreases 42.9%. It obtains the effects of calculating gridding size on the multimode penetrator formation parameters, such as velocity and length-diameter ratio. The simulation results were validated through X-ray imaging experimentation. Both results are in good agreement.
机译:旨在模拟成型电荷建模的ANSYS / LS-DYNA软件的问题,研究了计算网格尺寸对多模渗透器形成的影响。可以发现,当准网格尺寸为0.028倍的电荷口径或更小时,穿透器的形成可以良好的路径结果。它获得了模型节点的变化曲线和具有网格大小的特定计算机的计算时间。当网格尺寸为10.022至0.028倍时,模型节点会降低30.8%,计算时间降低42.9%。它获得计算网格尺寸在多模穿透器形成参数上的效果,例如速度和长度直径比。通过X射线成像实验验证了仿真结果。这两个结果都很吻合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号