首页> 外文会议>International Conference on Advanced Design and Manufacturing Engineering >Thermodynamic Model of Calculation of Sulfur Distribution Ratio between B_2O_3-Containing Slag and Molten Steel
【24h】

Thermodynamic Model of Calculation of Sulfur Distribution Ratio between B_2O_3-Containing Slag and Molten Steel

机译:含B_2O_3炉渣和钢水熔浆硫分布比计算的热力学模型

获取原文

摘要

A thermodynamic model of calculation of sulfur distribution ratio between B_2O_3-containing slag and molten steel has been developed on the basis of the ion and molecule coexistence theory. Based on the model, the effects of B_2O_3 content and slag basicity on the sulfur distribution ratio in 1873K were investigated respectively. The results indicate that the sulfur distribution ratio decreased with increasing the content of B_2O_3, and when the content of B_2O_3 exceeds 6%, the sulfur distribution ratio was lower than 2.0. Therefore, in order to ensure the desulphurization ability of slag, the content of B_2O_3 should be controlled at about 6%. Moreover the sulfur distribution ratio can be increased by increasing the slag basicity.
机译:基于离子和分子共存理论,开发了含含含硫和钢水和钢水钢和钢水之间的硫分布比的热力学模型。 基于该模型,研究了B_2O_3含量和炉渣碱度对1873K硫分布比的影响。 结果表明,随着B_2O_3的含量增加,硫分布比率降低,并且当B_2O_3的含量超过6%时,硫分布比低于2.0。 因此,为了确保炉渣的脱硫能力,B_2O_3的含量应控制在约6%。 此外,通过增加渣碱度可以增加硫分布比。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号