首页> 外文会议>International Conference on Advanced Design and Manufacturing Engineering >Effect of weld metal hardening property on crack driving force and deformation behavior of mismatched welded joint
【24h】

Effect of weld metal hardening property on crack driving force and deformation behavior of mismatched welded joint

机译:焊接金属硬化性对错配焊接接头裂纹驱动力及变形行为的影响

获取原文

摘要

Effect of weld metal hardening property on the deformation behavior and crack driving force of strength mismatched welded joint with crack has been investigated using finite element method under plain strain condition. The results show that when the apply load is small, there is only small scale deformation around the crack tip, the whole structure is still in linear or small scale yielding condition therefore the weld metal hardening property has no significant effect on crack driving force. As the applied load increasing, the deformation region enlarges and at the same time the deformation level around the crack tip deepens, the increasing of weld metal hardening property decreases the local deformation level, consequently leading to the decreasing of the crack cracking force.
机译:普通菌株条件下采用有限元法研究了焊接金属硬化性对强度失配焊接接头的变形行为和裂纹驱动力的影响。结果表明,当施加载荷很小时,裂缝尖端只有小规模变形,整个结构仍处于线性或小规模的屈服条件,因此焊接金属硬化性能对裂纹驱动力没有显着影响。随着所施加的负载增加,变形区域扩大并且同时裂纹尖端周围的变形水平加深,焊接金属硬化性的增加降低了局部变形水平,从而导致裂纹裂化力的减小。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号