首页> 外文会议>International Conference on Green Building, Materials and Civil Engineering >Heat Transfer Characteristics of the Phase Change Material Microcapsule Slurry in Solid Phase State
【24h】

Heat Transfer Characteristics of the Phase Change Material Microcapsule Slurry in Solid Phase State

机译:固相状态相变材料微胶囊浆料的传热特性

获取原文

摘要

This experiment is performed to investigate heat transfer characteristics with the PCM microcapsule slurry in a solid phase state at a horizontal rectangular enclosure heating from below and cooling from top. Some important parameters are taken into account such as the mass concentration of the PCM, the temperature difference between heating plate and cooling plate, Nusselt number Nu, Rayleigh number Ra and the aspect ratio (width/height) of the horizontal rectangular enclosure. Experiment is done under the thermal steady condition in the PCM microcapsule slurry. Heat transfer coefficient is measured under various temperature differences in PCM mass concentrations of 10% and 20%. And relationship with Nusselt number Nu and Rayleigh number Ra is summarized to various heights H or the aspect ratio (width/height) Ar of enclosure.
机译:进行该实验以研究在水平矩形外壳中的固相状态下用PCM微胶囊浆料从下方加热并从顶部冷却来研究传热特性。考虑了一些重要的参数,例如PCM的质量浓度,加热板和冷却板之间的温差,NURSETLE NU NU,RAYLEIGH RAMACE RA和水平矩形外壳的纵横比(宽度/高度)。实验是在PCM微胶囊浆料中的热稳定状态下进行的。在PCM质量浓度为10%和20%的各种温度差下测量传热系数。与Nusselt数Nu和Rayleigh号Ra的关系总结到各种高度H或外壳的纵横比(宽度/高度)AR。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号