首页> 外文会议>URSI General Assembly and Scientific Symposium >New methods for the prediction of rain attenuation in terrestrial links
【24h】

New methods for the prediction of rain attenuation in terrestrial links

机译:陆地环节雨衰减预测的新方法

获取原文

摘要

Rain attenuation is the main cause of unavailability in radio links operating at frequencies above 10 GHz. Attenuation due to rainfall along a path may be calculated by integrating the specific attenuation over the path length if the rainfall rate variation along the path is known. Rainfall rate, however, is inhomogeneous in both space and time posing a major difficulty in predicting rain attenuation for link design. Most practical methods make use of cumulative distributions of rainfall rate measured at a point. The statistical rain profile is simply characterized by an effective rainfall rate derived from measurements. An alternative procedure is to apply the reduction coefficient to the actual path length, which yields an equivalent path length over which the rain intensity may be assumed to be constant. This type of procedure is currently adopted in the methodology of Recommendation ITU-R P.530. One limitation in the current ITU-R method is that the attenuation is predicted using only the measured rainfall rate exceed at 0.01% of the time. For other percentages of time, the attenuation is obtained using extrapolation functions. More importantly, the method is based on fitting of the path reduction factor using limited experimental data, without an actual physical basis. This paper will discuss possible new approaches to develop a prediction method relying on a stronger physical basis. One possibility is to include in the method parameters such as the wind speed and direction during rainy conditions, which should affect the attenuation along the links in addition to the cumulative distribution of rainfall rate and link geometry already considered in the current method. A tentative method will be presented, derived based on measurements of signal attenuation in converging links with different path lengths, spatial orientations and operation frequencies, as well as information on wind speed and direction during rainy periods. Another approach is the use of rain at- enuation synthesizers to predict not only attenuation statistics but also its dynamic behaviour. Recently there has been extensive work being carried out in time series synthesizers using the synthetic storm technique to provide attenuation time series. The main challenge here is to obtain the synthesizer parameters for different link characteristics and radiometorological regions. This kind of modelling is still in its early stages but some available results will be reviewed.
机译:雨衰减是在10 GHz高于10 GHz的频率下运行的无线电链路中不可用的主要原因。如果已知沿着路径的降雨速率变化,则可以通过将特定衰减集成在路径长度上的特定衰减来计算引起的降雨导致的衰减。然而,降雨率在空间和时间内不均匀地构成了预测链接设计的雨衰减的重大困难。大多数实用方法利用在一点上测量的降雨率的累积分布。统计雨简谱简单地表征了源自测量的有效降雨速率。替代过程是将减少系数施加到实际路径长度,这产生了等效路径长度,在该等效路径长度,雨强度可以被认为是恒定的。此类程序目前在ITU-R第530号建议书的方法中采用。目前ITU-R方法中的一个限制是使用仅测量的降雨率超过0.01%的时间来预测衰减。对于其他百分比,使用外推函数获得衰减。更重要的是,该方法基于使用有限实验数据的路径减小因子的拟合,而没有实际物理。本文将讨论可能的新方法来开发依赖于更强的物理基础的预测方法。一种可能性是在雨季条件下的风速和方向之类的方法参数中包括除了在当前方法中已经考虑的降雨率和连杆几何形状的累积分布之外,这应该影响沿着链路的衰减。将基于在与不同路径长度,空间取向和操作频率的会聚链路中的信号衰减的测量结果来呈现暂定方法,以及在雨季期间的风速和方向上的信息。另一种方法是利用雨大学合成器来预测衰减统计而且还具有其动态行为。最近,使用合成风暴技术在时间序列合成器中进行了广泛的工作,以提供衰减时间序列。这里的主要挑战是获得不同链路特性和放射菌热区的合成器参数。这种建模仍处于早期阶段,但将审查一些可用的结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号