OPTICAL ORIENTATION MEASUREMENT FOR REMOTE SENSING SYSTEMS WITH SMALL AUXILIARY IMAGE SENSORS

摘要

The accurate measurement of the exterior orientation of remote sensing systems is essential for the quality of the resulting imagery products. Fast orientation changes of the camera immediately before, during or after image acquisition are still serious problems in aerial and satellite based remote sensing. This is due to the fact that in many cases such orientation changes can neither be suppressed effectively nor measured adequately with conventional technology at reasonable costs. In this article, an approach for an auxiliary orientation measurement system is presented that is able to measure a remote sensing system's orientation changes with both, a very high rate and appropriate precision. Two or more auxiliary image sensors are used to measure the orientation changes on the basis of the shift in their images. It is shown that these shifts can be determined by tracking suitable point features through a series of images in real time using a standard mobile CPU for up to 480 images per second. From these shifts the orientation of the whole system can be derived and offset-corrected by conventional orientation measurements. The approach was tested on a test flight with the DLR's MFC line camera and two auxiliary high-speed CMOS cameras. The results are presented and compared to the reference measurements of a high-end INS/GPS system.