首页> 外文会议>International Society for Photogrammetry and Remote Sensing Commission Technical Commission Symposium >OFF-THE-SHELF CLOSE-RANGE PHOTOGRAMMETRIC SOFTWARE FOR CULTURAL HERITAGE DOCUMENTATION AT STONEHENGE
【24h】

OFF-THE-SHELF CLOSE-RANGE PHOTOGRAMMETRIC SOFTWARE FOR CULTURAL HERITAGE DOCUMENTATION AT STONEHENGE

机译:巨石阵的文化遗产文档的现成近距离摄影软件

获取原文

摘要

This paper is a summary of a student internship with English Heritage's Photogrammetric Unit. During this placement affordable solutions for heritage close-range photogrammetric measurement were examined. Topcon's Image Surveying Station PI-3000 photogrammetric software was used on a project to record carvings found on one of the stones at Stonehenge. Analysis of this carving (and others) is essential in order to understand Stonehenge's history as well as to help to conserve its condition. An original survey of this carving was carried out in 1967 (Atkinson, 1968) providing context against which this survey using PI-3000 could be compared to in the future. In preparation for this work a comparison of camera calibration techniques (using PI-3000 and PhotoModeler) was carried out. Creating a 3D model using the photogrammetric method based on a bundle adjustment requires knowledge of camera calibration parameters. Photogrammetric camera calibration parameters allow for the recovery of the central perspective bundle. They can be determined during a self calibration process if using appropriate software. It was decided to assess the camera calibration provided by PI-3000. Therefore, to test the software, a Canon IXUS 900Ti was calibrated using PI-3000 and PhotoModeler. The paper presents the results of these calibrations and compares the two software packages. PI-3000 was then used to document a single carving found on inner face of the 53rd stone of Stonehenge. The outcome could be compared with the survey performed in 1967. Around ten images were collected with a calibrated Cannon A640 camera. Scale was introduced to the scene using a ruler laid against the stone. PI-3000 was then used to produce a meshed surface of the carving. Results will be presented. The paper concludes that off-the-shelf photogrammetric equipment and software could be utilized in commercial projects to provide heritage recording. However, principles of close range photogrammetry still needed to be understood in order to produce high quality results.
机译:本文是与英语遗产的摄影测量单元的学生实习的摘要。在此,检查了遗产近距离摄影测量的实惠解决方案。 Topcon的图像测量站PI-3000摄影测量软件用于项目中的一个项目,以录制在巨石阵的一块石头上的雕刻。对这种雕刻(和其他人)的分析至关重要,以了解Stonehenge的历史,并有助于保护其状况。 1967年(Atkinson,1968年)在1967年(Atkinson,1968)中进行了一个原创调查,提供了使用PI-3000的这项调查可以在未来进行比较。为此工作准备进行摄像机校准技术(使用PI-3000和PhotomeEler)的比较。使用基于捆绑调整的摄影测量方法创建3D模型需要了解相机校准参数。摄影测量相机校准参数允许恢复中央透视捆绑包。如果使用适当的软件,可以在自校准过程中确定它们。决定评估PI-3000提供的相机校准。因此,要测试软件,使用PI-3000和Photomodeler校准CANON IXUS 900TI。本文介绍了这些校准的结果,并比较了两个软件包。然后使用PI-3000来记录在巨石阵53块石头内面上的单一雕刻。可以将结果与1967年进行的调查进行比较。通过校准的Cannon A640相机收集大约十种图像。使用针对石头的尺子引入了场景的比例。然后使用PI-3000来生产雕刻的雕刻表面。将提出结果。本文得出结论,商业项目可在商业项目中使用现成的摄影测量设备和软件,以提供遗产录制。然而,仍然需要理解近距离摄影测量的原理,以便产生高质量的结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号