This paper studies the effectiveness of applying coating on the tube side to resist fouling in reboilers on crude oil stabilizers. In this process crude flows in the tubes of vertical reboilers heated by 60 psig steam to stabilize crude oil to meet True Vapor Pressure (TVP) and H2S specifications. Due to the high temperature, reboilers are subject to fouling predominantly on the crude side, resulting in low heat transfer and shut down for cleaning. Based on vendor claims on the effectiveness of coatings to reduce fouling and increase the interval between cleanings, a study was undertaken to compare the operation of one set of reboilers on Column A coated on the crude side (inside) with a protective coating, with another set of similar reboilers and similar operating conditions with no coating, on an adjacent Column B. The study was conducted for an interval of about eleven (11) months and the results of this comparative study are presented in this paper.
展开▼
