首页> 外文会议>International Symposium on Fundamentals of Deformation and Annealing >Evolution of the Deformed Substructure Obtained by Cold-Rolling in IF Steel.
【24h】

Evolution of the Deformed Substructure Obtained by Cold-Rolling in IF Steel.

机译:钢冷轧所获得的变形亚结构的演变。

获取原文

摘要

The aim of this study is to acquire more quantitative data on the cold-deformed state, in order to determine the key parameters for nucleation (like orientation gradient, dislocation density, degree of fragmentation...) and to correlate these to parameters which can be predicted by a mean field deformation model. Experimentally, a Ti-IF hot band has been deformed by cold rolling up to 51%. The deformed microstructures are finely characterised using EBSD inside the SEM. It appears then that the heterogeneity of deformation inside the grains begins very early. Some grains undergo fragmentation whereas some others deform very homogeneously. Misorientation and degree of fragmentation are found to be orientation and rolling level dependent. These deformation parameters are plotted against the Taylor factor, calculated in each grain.
机译:本研究的目的是在冷变形状态下获取更多的定量数据,以便确定成核的关键参数(如取向梯度,位错密度,碎裂程度......),并将这些与参数相关联通过平均场变形模型预测。实验,Ti-如果热带通过冷轧变形高达51%。通过SEM内的EBSD精细表征变形的微结构。似乎谷物内变形的异质性很早开始。有些谷物经过碎片,而其他一些颗粒非常均匀地变形。发现错误化程度和碎片程度是取向和滚动水平的依赖性。将这些变形参数绘制在每个谷物中计算的泰勒因子。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号