Correction of Bound and Free Fluid Volumes in the Timur-Coates Permeability Equation for the Presence of Heavy Oil—A Case Study From the Golfo San Jorge Basin, Argentina
展开▼
机译:矫正Timur-Coate磁散方程中的束缚和自由流体体积,从而存在重油的存在 - 阿根廷Golfo San Jorge盆地的案例研究
In the Golfo San Jorge basin, Argentina, the Timur- Coates permeability index obtained from the T2 distributions is considered as a good indicator of reservoir quality and has been used as a very important variable for production forecast. However, when heavy oil is present, having a relaxation time below the standard free fluid-bound fluid cut-off of 33 ms, it is conventionally counted as part of the bound fluid, independently of its mobility. For this reason, in case of movable heavy oil, the standard Timur-Coates permeability index using 33 ms tends to be always pessimistic, in eventual disagreement with other reservoir quality indicators as the SP curve, depositional environment, cuttings and production data. In order to perform a correction of the permeability index for the presence of heavy oil, two layers of one well from the Diadema field, with a complete set of SP, Resistivity, MREX and production data was selected and evaluated using 2DNMR (T2intrinsic - Diffusion) maps, which uses the diffusivity contrast for discriminating between capillary bound water and heavy oil, within the bound fluid window (BVI). The clay bound water (CBW) cut off has been chosen to be 6 ms. The results show that the corrected Timur-Coates permeability can increase by an order of magnitude in the tested zone of the reservoir layers, but can become even higher within the whole layers, which is a reasonable estimation for the corresponding channel depositional environment. The production data also support the interpretation, indicating that the NMR rock quality estimation can be performed more accurately even in the presence of heavy oil. The corrected Timur- Coates permeability values can be used in a future update for forecasting well production.
展开▼