REMOVAL OF ARSENIC CONTENT FROM COPPER CONCENTRATES BY ELECTROCHEMICAL FLOTATION

摘要

Arsenic bearing minerals such as enargite (Cu_3AsS_4) and tennantite (Cu_(12)As_4S_(13)), which may associate with major copper minerals such as chalcopyrite (CuFeS_2), chalcocite (Cu_2S) and bornite (Cu_2FeS_4), usually report to the copper concentrate in conventional flotation due to their similar flotation properties. Arsenic in a copper concentrate causes environmental problems and also problems in the subsequent pyrometallurgical process. Voltammetric studies were carried out to investigate the oxidation characteristics of enargite, tennantite, chalcopyrite, chalcocite and bornite. Contact angle measurements and micro-flotation tests were conducted to examine the flotation characteristics of enargite and chalcopyrite under controlled pulp potentials. Selective flotation of enargite from chalcopyrite under varied pulp potentials was conducted to investigate the feasibility of arsenic removal from a copper concentrate. The test results indicate that the non-arsenic bearing copper minerals (chalcopyrite, chalcocite and bornite) were easier to oxidise than arsenic bearing minerals (enargite and tennantite) in an alkaline solution. Enargite floated well at a potential as high as +0.45 V vs. SCE while chalcopyrite was completely depressed at a potential higher than +0.43 V vs. SCE. Selective flotation revealed that enargite can be successfully removed from chalcopyrite through controlling the pulp potential at +0.30 approx +0.50 V vs. SCE.