首页> 外文会议>International Conference on Space Information Technology >A new concept — critical number of looks for multilook processing method for InSAR noise suppression
【24h】

A new concept — critical number of looks for multilook processing method for InSAR noise suppression

机译:一个新的概念 - insar噪声抑制的多卷处理方法的临界数量

获取原文

摘要

Interferometric synthetic aperture radar(InSAR) is usually employed to provide altitude information of terrain. There are many factors to cause interferogram noise and the noise decreases height measurement accuracy of InSAR. In this paper, Multilook processing technique, which is used to reduce interferogram noise in InSAR, is studied. And a new concept — critical number of looks for multilook processing is proposed. The number of looks must be smaller than critical number of looks when multilook processing is applied to the interferogram noise suppression. The new concept benefits the multilook processing for InSAR noise suppression. With the knowledge of critical number of looks, the proper number of looks can be chosen for InSAR multilook processing to reduce the interferogram noise. The equations of range and azimuth critical numbers of looks are presented for both single baseline spacebome InSAR and multibaseline spaceborne InSAR. The critical number of looks can be obtained from these equations. In the end, multilook processing with different numbers of looks is applied to InSAR simulated data and the results show the validity of critical number of looks in InSAR.
机译:通常采用干涉性合成孔径雷达(INSAR)以提供地形的高度信息。导致干扰图噪声有许多因素,并且噪声降低了INSAR的高度测量精度。本文研究了用于减少INSAR干扰图噪声的多核处理技术。提出了一种新的概念 - 临界多核处理的关键数量。当多圆加工应用于干涉图噪声抑制时,外观数量必须小于临界数量。新概念有利于insar噪声抑制的多机处理。随着临界数量的知识,可以选择适当的外观,以便为INSAR MULTOROOK处理选择以减少干扰图噪声。对于单个基线SpaceBome Insar和Multibaseline Foundborne Insar,介绍了范围和方位角临界数的方程。可以从这些方程获得临界外观。最后,应用了不同数量的外观的多辊处理应用于INSAR模拟数据,结果显示了insar临界数量的有效性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号