Influence of C and Al Addition on Microstructure and Mechanical Properties of Ultrafine TiCN-based Cermets

机译：C和Al加法对超细TiCN基金属陶瓷组织和力学性能的影响

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

In this paper, the TiCN-based cermets were fabricated with ultrafine TiCN, metal binders and carbide additives. Different content of C and Al were separately added to eliminate the oxygen contamination. The composition of the mixture was TiCN-10Mo-20WC- 20Ni-xC/Al. Effect of the C and Al addition on microstructure and mechanical properties was investigated. Results indicated that cermets with carbon addition had higher relative density and more homogenous microstructure while the Al addition had the opposite effect. Proper addition of carbon improved the mechanical properties.

机译：本文用超细TiCN，金属粘合剂和碳化物添加剂制造了基于TICN的金属膜。单独添加C和Al的不同含量以消除氧气污染。混合物的组成是TiCN-10MO-20WC-20NI-XC / Al。研究了C和Al添加对微观结构和机械性能的影响。结果表明，具有碳加成的金属陶瓷具有更高的相对密度和更均匀的微观结构，而Al Braint具有相反的效果。正确添加碳改善了机械性能。

著录项

来源
《China International Conference on High-Performance Ceramics》|2008年||共3页
会议地点
作者
Xianjuan Ni; Longhao Qi;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类玻璃、陶瓷;
关键词
TiCN-based cermets; carbon addition; microstructure;

机译：基于TICN的金属膜;碳添加;微观结构;

相似文献

外文文献
中文文献
专利

1. Influence of C and Al Addition on Microstructure and Mechanical Properties of Ultrafine TiCN-based Cermets [J] . Xianjuan Ni, Longhao Qi Key Engineering Materials . 2008,第pa2期

机译：碳和铝的添加对超细TiCN基金属陶瓷组织和力学性能的影响
2. Influence of coarse TiCN content on the morphology and mechanical properties of ultrafine TiCN-based cermets [J] . Huiwen Xiong, Yu Wen, Xueping Gan, Materials Science and Engineering . 2017,第JANa13期

机译：粗TiCN含量对超细TiCN基金属陶瓷形态和力学性能的影响
3. Ti(C,N)-based cermets containing uniformly dispersed ultrafine rimless grains: Effect of VC additions on the microstructure and mechanical properties [J] . CERAMICS INTERNATIONAL . 2020,第12期

机译：基于含有均匀分散的超细无颗粒的CERMET：VC添加对微观结构和机械性能的影响
4. Influence of C and Al Addition on Microstructure and Mechanical Properties of Ultrafine TiCN-based Cermets [C] . Xianjuan Ni, Longhao Qi China International Conference on High-Performance Ceramics . 2008

机译：C和Al加法对超细TiCN基金属陶瓷组织和力学性能的影响
5. The Influence of Sc and Zr Additions on the Microstructure and Mechanical Behavior of Ultrafine Grained Al-Mg Alloys Processed by Powder Metallurgy. [D] . Harrell, Tammy Jeanne. 2014

机译：Sc和Zr的添加对粉末冶金超细晶粒Al-Mg合金的组织和力学行为的影响。
6. Effects of V and Co Element Addition on Microstructures and the Mechanical Properties of In Situ Biphasic Hybrid (TiCxNy–TiB2)/Ni Cermets [O] . Feng Qiu, Xiangzheng Duan, Xiujuan Li, 2018

机译：钒和钴元素添加对原位双相混合体（TiCxNy–TiB2）/ Ni金属陶瓷的组织和力学性能的影响
7. Research of influence of alloying additions of nano-wc on microstructure and mechanical properties of cermets of TiC-VC-NiCr [O] . Коваль Ігор Володимирович, Бодрова Людмила Гордіївна, Koval Ihor, 2010

机译：纳米碳化钨合金化添加对TiC-VC-NiCr金属陶瓷微结构和力学性能影响的研究
8. Effect of Microstructure on the Mechanical Properties of Titanium Alloys: Effect of Microstructure on the Mechanical Properties of Titanium-Manganese Alloys Containing Alpha-Solute Additions [R] . Ogden, H. R., Holden, F. C., Jaffee, R. I. 1954

机译：微观结构对钛合金力学性能的影响：微观结构对含α-溶剂添加剂的钛锰合金力学性能的影响

Influence of C and Al Addition on Microstructure and Mechanical Properties of Ultrafine TiCN-based Cermets

摘要

著录项

相似文献

相关主题

期刊订阅