首页> 外文会议>China International Conference on High-Performance Ceramics >Layer Structure Growth of Orthorhombic Boron Nitride Thin Films by RF-PEPLD
【24h】

Layer Structure Growth of Orthorhombic Boron Nitride Thin Films by RF-PEPLD

机译:RF-PEPLD层结构氮化硼薄膜的层结构生长

获取原文

摘要

Orthorhombic boron nitride film is prepared on Si(100) substrate by radio frequency plasma enhanced pulse (Nd:YAG) laser deposition (RF-PEPLD) in Ar-N_2 gas system, assisted with substrate pulse negative bias -150v, substrate temperature of 500°C and deposition time of 30 minutes. The phase compositions of the film are characterized by Fourier transform infrared (FTIR) spectroscopy, glancing-angle X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscopy (SEM). The results show that high quality orthorhombic boron nitride film has been prepared. A layer structure growth mechanism of orthorhombic boron nitride phase upon RF-PEPLD is discussed in this paper. A thin layer h-BN [101] is deposited before depositing o-BN and h-BN mixed phase, then o-BN percentage composition of the BN film becomes creasing.
机译:在AR-N_2气体系统中通过射频等离子体增强脉冲(ND:YAG)激光沉积(RF-PEPLD)在Si(100)基板上制备正交氮化硼膜,辅助基板脉冲负偏置-150V,衬底温度为500 °C和沉积时间为30分钟。薄膜的相组合物的特征在于傅里叶变换红外(FTIR)光谱,渗透角X射线衍射(XRD),拉曼光谱和扫描电子显微镜(SEM)。结果表明,已经制备了高质量的邻硼氮化硼膜。本文讨论了RF-PEPLD上的正极硼氮化物相的层结构生长机制。在沉积O-Bn和H-BN混合相之前沉积薄层H-Bn [101],然后将Bn膜的O-Bn百分比组成变为折痕。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号