Microstructural Analysis of Aluminum Coatings Deposited by HVOF Process on Complex Surfaces

摘要

Aluminum coatings applied by thermal spraying are widely used for protection against marine corrosion. The HVOF process produces aluminum coatings with high particle velocity, at a higher temperature for longer, permitting a high adhesion among the deposited particles. The objective of this work was to analyze how the microstructure of the aluminum coating sprayed by HVOF was formed on different complex surfaces. The influence of different deposition process parameters on the coating, varying the angle of incidence during deposition, substrate preheating and nitrogen flow was studied. Outer corner and convex surfaces presented greater uniformity in the formed microstructures. The angle of incidence was the most influential parameter on the coatings, filling complex profiles better, with 60° of incidence, although the 90° of incidence increased the adhesion. The potentiodynamic polarization test was performed to evaluate the corrosion resistance of coatings. The higher preheating and lower angle of incidence increased the corrosion resistance of coatings. Corrosion tests in salt spray are in progress in order to compare with continuous results.