AN EVALUATION OF THE GEOMETRY AND WEIGHT OF A MIXED FLOW LOW BYPASS RATIO TURBOFAN ENGINE WITH AN INTERMEDIATE TURBINE BURNER

摘要

Turbofan engines are designed with two or even three spools of fan- compressor and turbine combinations. This arrangement allows the possibility of increased power output by placing a second combustor between turbine spools. Such a combustor is called an "Intermediate Turbine Burner, ITB," and in a twin spool turbofan engine the combustor would be placed between the discharge of the high pressure turbine and the entrance of the low pressure turbine. An evaluation of the mechanical design of an ITB integrated into a low bypass ratio mixed flow turbofan is the subject of this paper. It is well known that an engine with an ITB has increased specific thrust but at the expense of increased specific fuel consumption. To take advantage of the ITB potential, the choice of cycle parameters - fan pressure ratio, overall pressure ratio and bypass ratio must be evaluated, and recent studies have demonstrated that the turbofan cycle with an ITB should have increased fan and overall pressure ratios to maximize performance. However, little has been done to estimate the weight and dimensions of an ITB integrated engine including the weight, flow path area and length of the ITB. Of particular concern are the volume and resulting flow path area and length required for the ITB.