A chemical oxygen-iodine laser (COIL) was used for cutting aluminum, titaniumjnconel and copper plates. The laser was operated with a stable resonator having an intracavity aperture to produce a circular COIL beam with very few transverse modes. The multimode focal spot diameter was calculated to be 0.24 mm. The new aluminum cut was of particularly high kerf edge quality. These COIL cutting data are compared with an existing theoretical laser cutting model. Using thermophysical data for aluminum, titanium, inconel and copper, this theory agrees very well with the data. To test the versatility of the model, the effects of different assumptions are examined; different assumptions produced very little effect on model predictions at high cutting speeds and a small difference at very slow cutting speeds. Overall, the theoretical model provides good agreement with experiments for a wide variety of metals.
展开▼
