首页> 外文会议>International Mechanical Engineering Congress and Exposition >(V08CT09A007)VISCOUS DISSIPATION AND SORET EFFECTS ON NON - DARCY MIXED CONVECTIVE FLOW CONSIDERING NANOFLUIDS
【24h】

(V08CT09A007)VISCOUS DISSIPATION AND SORET EFFECTS ON NON - DARCY MIXED CONVECTIVE FLOW CONSIDERING NANOFLUIDS

机译:(V08CT09A007)考虑纳米流体的非达西混合对流流动的粘性耗散和索引效应

获取原文
获取外文期刊封面目录资料

摘要

We investigate the steady boundary layer mixed convective flow over a horizontal impermeable wall embedded in a porous medium filled with a water-based nanofluid. The model used for the nanofluid incorporates the effects of the volume fraction parameter. The main objective of the present study is to investigate viscous dissipation and Soret effects on heat and mass transfer in a nanofluid containing Al_2O_3 and TiO_2 nanoparticles. The temperature and concentrations at the wall were kept constant. A similarity transformation was used to obtain a system of nonlinear ordinary differential equations. The resulting nonlinear governing equations with associated boundary conditions were solved numerically using the Matlab bvp4c solver. The effects of viscous dissipation and the Soret parameter on dimensionless temperature, concentration, heat and mass transfer are presented graphically. It was observed that the heat transfer rate decreased with an increase in nanoparticle volume fraction. Comparison of current and previously published results (Lai and Kulaki [10], Arfin et al. [12]) showed a good agreement.
机译:我们研究了嵌入在填充有水基纳米流体的多孔介质中的水平不透水壁上的稳定边界层混合对流流。用于纳米流体的模型包括体积分数参数的影响。本研究的主要目的是研究含有Al_2O_3和TiO_2纳米颗粒的纳米流体中的热量和质量转移的粘性耗散和溃毒作用。壁上的温度和浓度保持恒定。使用相似性转换来获得非线性常微分方程的系统。使用MATLAB BVP4C求解器在数值上进行了相关边界条件的所得到的非线性控制方程。粘性耗散和SORET参数对无量纲温度,浓度,热量和传质的影响。观察到,随着纳米颗粒体积分数的增加,传热速率降低。电流和先前公布的结果的比较(Lai和Kulaki [10],Arfin等人[12])表现出良好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号