首页> 外文会议>International Conference on Material Engineering and Application >The Preparation and Testing of Rheological Properties for Single- and Double-Grading Magnetorheological Composite Gels
【24h】

The Preparation and Testing of Rheological Properties for Single- and Double-Grading Magnetorheological Composite Gels

机译:单分层和双层磁流变复合凝胶的流变性能的制备和测试

获取原文

摘要

The modified carbonyl iron powders with single particle size(single-grading) and binary particle sizes (double-grading) were added in the composite gel, which was prepared by using methyl silicone oil, gelatin and agaropectin colloids as raw materials, and then the single- and double-grading magnetorheological composite gels(MRCGs) were prepared by vacuum decompression. The effects of particle size and gradation of carbonyl iron power on the rheological behavior of the MRCGs were studied. The results show that the shear strength of single-grading MRCGs decreased gradually with the decrease of the carbonyl iron particle size. However that the shear strength of the double-grading MRCGs with the gradation of 90 wt% un-ball-milled and 10 wt% ball-milled carbonyl iron powders first increased then decreased with the elongation of milling time (the decrease of carbonyl iron paticle size) and reached 99.6kPa when ball milling time for 24h, which was 17.8kPa larger than that of un-ball-milled single-grading MRCGs.
机译:在复合凝胶中加入具有单粒度(单分级)和二元粒度(双层分级)的改性羰基粉末,通过使用甲基硅油,明胶和琼脂蛋白胶体作为原料制备,然后是通过真空减压制备单级和双分级磁流变复合凝胶(MRCGS)。研究了粒度对MRCG的流变行为的粒度和羰基的影响。结果表明,单级MRCG的剪切强度随着羰基铁颗粒尺寸的降低而逐渐降低。然而,具有90wt%Un-Ball-Milled和10wt%球磨基铁粉末的双层MRCGS的剪切强度首先增加,然后随着研磨时间的伸长(羰基铁薄粒减少而降低当球铣削时间为24小时时达到99.6kpa,这是17.8kpa大于未滚珠碾磨的单级MRGS的17.8kpa。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号