首页> 外文会议>Global Conference on Materials Science and Engineering >Effect of turbine materials on power generation efficiency from free water vortex hydro power plant
【24h】

Effect of turbine materials on power generation efficiency from free water vortex hydro power plant

机译:汽轮机材料对自由水涡流厂发电效率的影响

获取原文

摘要

The objective of this research was to study the effect of turbine materials on power generation efficiency from the water free vortex hydro power plant made of steel and aluminium. These turbines consisted of five blades and were twisted with angles along the height of water. These blades were the maximum width of 45 cm. and height of 32 cm. These turbines were made and experimented for the water free vortex hydro power plant in the laboratory with the water flow rate of 0.68, 1.33, 1.61, 2.31, 2.96 and 3.63 m~3/min and an electrical load of 20, 40, 60, 80 and 100 W respectively. The experimental results were calculated to find out the torque, electric power, and electricity production efficiency. From the experiment, the results showed that the maximum power generation efficiency of steel and aluminium turbine were 33.56% and 34.79% respectively. From the result at the maximum water flow rate of 3.63 m~3/min, it was found that the torque value and electricity production efficiency of aluminium turbine was higher than that of steel turbine at the average of 8.4% and 8.14%, respectively. This result showed that light weight of water turbine can increase the torque and power generation efficiency.
机译:该研究的目的是研究涡轮机材料对由钢和铝制型水的无水涡流水电站发电效率的影响。这些涡轮机由五个刀片组成,并且沿水高的角度扭曲。这些刀片的最大宽度为45厘米。和32厘米的高度。这些涡轮机进行并在实验室中进行的水流涡流水电站,水流量为0.68,1.33,1.61,2.31,2.96和3.63 m〜3 / min,电荷为20,40,60, 80和100周分别。计算实验结果以找出扭矩,电力和电力生产效率。从实验中,结果表明,钢和铝涡轮机的最大发电效率分别为33.56%和34.79%。从结果以3.63 m〜3 / min的最大水流速,发现铝涡轮机的扭矩值和电力生产效率高于钢制涡轮机的平均值分别为8.4%和8.14%。该结果表明,水轮机的重量重量可以提高扭矩和发电效率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号