Electrocoagulation is electrochemical water and wastewater treatment technology that is the easiest technology using an electrochemical cell supplied by DC power to the electrodes. The application of the electrocoagulation process was purposed to treat oily bilge water. The results indicated that the oil removal efficiency was achieved approximately 99.62% at an initial oil concentration of 60 g/l in batch processes. The current density of 62.5 mA/cm~2 applied the process produced oil removal efficiency of 99.95%.In a continuous mode with the initial water only present in the reactor, the oil removal efficiency was achieved approximately 100% with a hydraulic residence time (HRT-1) of 6 h for 60 min of operations. However, the initial oil/water emulsion at a concentration of 63.89 g/l present in the reactor, the oil removal efficiency was approximately 13.33% with HRT-1 of 6 h for 90 h of operations.
展开▼
机译：电凝是电化学水和废水处理技术，这是使用由DC电力供应到电极的电化学电池的最简单技术。将电凝过程的应用被用来治疗油性舱底水。结果表明，在分批过程中以60g / l的初始油浓度的初始油浓度达到含油效率约为99.62％。目前密度为62.5 mA / cm〜2施加该过程的产油效率为99.95％。在连续模式下，在反应器中仅存在初始水，液压停留时间约为100％的排水效率（ HRT-1）6小时60分钟运营。然而，在反应器中浓度为63.89g / L的初始油/水乳液，除油效率为约13.33％，HRT-1为6小时，操作90小时。
展开▼
