首页> 外文会议>Conference on Stress Analysis and Mechanical Engineering Design >On the homogenization of periodic beam-like structures
【24h】

On the homogenization of periodic beam-like structures

机译:关于周期梁状结构的均质化

获取原文

摘要

A homogenization method for periodic beam-like structures that is based on the unit cell force transmission modes is presented. Its main advantage is that to identify the principal vectors of the state transfer matrix corresponding to the transmission modes it operates directly on the sub-partitions of the unit cell stiffness matrix and allows to overcome the problems due to ill-conditioning of the transfer matrix. As case study, the Pratt girder is considered. Closed form solutions for the transmission modes of this girder are achieved and used into homogenization. Since the pure bending mode shows that the Pratt unit cell transmits two kinds of bending moments, one given by the axial forces and the other originated by nodal moments, the Timoshenko couple-stress beam is employed as substitute continuum. Finally, a validation of the proposed procedure is carried out comparing the predictions of the homogenized models with the results of a series of girder f.e. analyses.
机译:提出了一种基于单元电池力传递模式的周期光束状结构的均质化方法。其主要优点是,为了识别与传输模式对应的状态传递矩阵的主要向量,它直接在单元电池刚度矩阵的子分区上操作,并且允许由于传输矩阵的不良调节而克服问题。如案例研究,考虑普拉特梁。实现该梁的传输模式的封闭形式解决方案并用于均质化。由于纯弯曲模式表明,普拉特单元电池透射两种弯矩,由轴向力给出的弯曲力,而另一个由节点矩所发起的弯曲矩,则Timoshenko耦合 - 应力梁被用作替代连续体。最后,进行了所提出的程序的验证,比较了均质模型的预测与一系列梁F.E.的结果进行了比较。分析。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号