首页> 外文会议>International Symposium on Personal, Indoor, and Mobile Radio Communications >Kalman Smoothing for Irregular Pilot Patterns; A Case Study for Predictor Antennas in TDD Systems
【24h】

Kalman Smoothing for Irregular Pilot Patterns; A Case Study for Predictor Antennas in TDD Systems

机译:卡尔曼为不规则的先导模式平滑; TDD系统中预测天线的案例研究

获取原文

摘要

For future large-scale multi-antenna systems, channel orthogonal downlink pilots are not feasible due to extensive overhead requirements. Instead, channel reciprocity can be utilized in time division duplex (TDD) systems so that the downlink channel estimates can be based on pilots transmitted during the uplink. User mobility affects the reciprocity and makes the channel state information outdated for high velocities and/or long downlink subframe durations. Channel extrapolation, e.g. through Kalman prediction, can reduce the problem but is also limited by high velocities and long downlink subframes. An alternative solution has been proposed where channel predictions are made with the help of an extra antenna, e.g. on the roof of a car, so called predictor antenna, with the primary objective to measure the channel at a position that is later encountered by the rearward antenna(s). The predictor antenna is not directly limited by high velocities and allows the channel in the downlinks to be interpolated rather than extrapolated. One remaining challenge here is to obtain a good interpolation of the uplink channel estimate, since a sequence of uplink reference signals (pilots) will be interrupted by downlink subframes. We here evaluate a Kalman smoothing estimate of the downlink channels and compare it to a cubic spline interpolation. These results are also compared to results where uplink channels are estimated through Kalman filters and predictors. Results are based on measured channels and show that with Kalman smoothing, predictor antennas can enable accurate channel estimates for a longer downlink period at vehicular velocities. The gaps in the uplink pilot stream, due to downlink subframes, can have durations that correspond to a vehicle movement of up to 0.75 carrier wavelengths in space, for Rayleigh-like non-line-of-sight fading.
机译:对于未来的大规模多天线系统,由于广泛的开销要求,通道正交下行链路导频不可行。相反,信道互惠可以在时分双工(TDD)系统中使用,使得下行链路信道估计可以基于在上行链路期间发送的导频。用户移动性影响互惠性,并使信道状态信息过时用于高速度和/或长的下行链路子帧持续时间。通道推断,例如通过卡尔曼预测,可以减少问题,但也受到高速度和长下行链路子帧的限制。已经提出了一种替代解决方案,其中在额外的天线的帮助下进行信道预测,例如,在汽车的屋顶上,所以被称为预测天线,主要目的是测量后来遇到的后天线的位置处的通道。预测器天线不受高速度直接限制,并且允许在下行链路中的信道内插而不是外推。这里的一个剩余挑战是获得上行链路信道估计的良好插值,因为一系列上行链路参考信号(导频)将被下行链路子帧中断。我们这里评估了下行链路通道的卡尔曼平滑估计,并将其与立方样条插值进行比较。这些结果也与通过卡尔曼滤波器和预测器估计的上行链路信道的结果相比。结果基于测量的通道,并表明与卡尔曼平滑,预测器天线可以实现用于在车辆速度下更长的下行链路时段的准确信道估计。由于下行链路子帧,上行链路导频流中的间隙可以具有对应于在空间中高达0.75个载波波长的车辆运动的持续时间,用于瑞利般的非视线衰落。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号