THE INFLUENCE OF RHODIUM CONTENT ON THE MECHANICAL PROPERTIES OF PLATINUM

机译：铑含量对铂的力学性能的影响

获取原文

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

The paper presents the results of investigation the influence of rhodium as an alloying element on the mechanical properties of platinum. A short-term and tensile strength were tested, at room and high temperatures, and also sliding rate and time to the destruction of the Pt-Rh system alloys at high temperatures. The results showed that alloying with rhodium strengthens the platinum while reducing its plasticity. Time to destruction is much longer in Pt-Rh alloys compared to pure platinum.

机译：本文提出了铑作为合金元素对铂的机械性能的影响结果。在室温和高温下测试短期和拉伸强度，以及在高温下的PT-RH系统合金破坏的滑动速率和时间。结果表明，用铑的合金化加强铂，同时降低其可塑性。与纯铂相比，Pt-Rh合金的破坏时间更长。

著录项

来源
《International Conference on Mining and Metallurgy》|2015年|xvi535p|共4页
会议地点
作者
Biserka Trumic; Aleksandra Ivanovic; Sasa Marjanovic;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 TD-532;
关键词
platinum; platinum alloys; rhodium; mechanical properties;

机译：铂;铂合金;铑;力学性能;

相似文献

外文文献
中文文献
专利

1. The Influence of the Rhodium Content in Platinum Catalysts and of the Gold Content in Nickel Catalysts on the Course of the CO + NO Reaction [J] . Wieslawa Cwikla, Dobieslaw Nazimek Adsorption Science & Technology . 1998,第8期

机译：铂催化剂中铑含量和镍催化剂中金含量对CO + NO反应过程的影响。
2. Influence of chlorine on the catalytic properties of supported rhodium, iridium and platinum in ring opening of naphthenes [J] . P.Samoila, F. Epron, P.Marecot Applied Catalysis, A. General: An International Journal Devoted to Catalytic Science and Its Applications . 2013,第Null期

机译：氯对环烷烃开环负载的铑，铱和铂催化性能的影响
3. Solubility and transport of platinum-group elements in supercritical fluids: Summary and estimates of thermodynamic properties for ruthenium, rhodium, palladium, and platinum solids, aqueous ions, and complexes to 1000 ℃ and 5 kbar [J] . David C. Sassani, Everett L. Shock Geochimica et Cosmochimica Acta: Journal of the Geochemical Society and the Meteoritical Society . 1998,第15期

机译：铂族元素在超临界流体中的溶解度和传输：钌，铑，钯和铂固体，水性离子和络合物在1000℃和5 kbar时的热力学性质的总结和估计
4. THE INFLUENCE OF RHODIUM CONTENT ON THE MECHANICAL PROPERTIES OF PLATINUM [C] . Biserka Trumic, Aleksandra Ivanovic, Sasa Marjanovic International Conference on Mining and Metallurgy . 2015

机译：铑含量对铂的力学性能的影响
5. The preparation, structures and spectroscopic properties of binuclear rhodium complexes and [platinum(phosphorus hydrogen oxygen)]/viologen systems: Time-resolved photocrystallography and the study of photoinduced intermolecular electron transfer. [D] . Gerlits, Oksana O. 2005

机译：双核铑配合物和[铂（磷氢氧）] /紫精体系的制备，结构和光谱性质：时间分辨光晶体学和光致分子间电子转移的研究。
6. Magnetron-Sputtered Biodegradable FeMn Foils: The Influence of Manganese Content on Microstructure Mechanical Corrosion and Magnetic Properties [O] . Till Jurgeleit, Lea Katharina Jessen, Eckhard Quandt, 2018

机译：磁控溅射可生物降解的FeMn箔：锰含量对组织机械腐蚀和磁性的影响
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Mechanical Properties of Highly Filled Elastomers VI. Influence of Filler Content and Temperature on Ultimate Tensile Properties [R] . Nederveen, C. J., Bree, H. W. 1967

机译：高填充弹性体的机械性能VI。填料含量和温度对极限拉伸性能的影响

THE INFLUENCE OF RHODIUM CONTENT ON THE MECHANICAL PROPERTIES OF PLATINUM

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅