A New Method of Producing Bend Angle by Applying Sheet Forging to V-bending Process

摘要

In actual manufacturing, some empirical method such as the bottoming technique is generally used in order to adjust the bend angles of products. In this study, a new method for controlling the bend angle in the V-bending process was attempted by applying sheet metal forging. In the experiments, three punches with lumps at the punch tip were used. These lumps were pushed into a bent section at the final stage of bending and were able to stretch the inside plane of the bent section. In both cases examined (using punches with one or two lumps at the tip), the bend angle decreased with an increase in punch displacement. This result shows new possibilities for controlling the bend angle by introducing plastic deformation to the bent section.