首页> 外文会议>Conference on Biomedical Thermoacoustics, Optoacoustics, and Acousto-Optics >Metallic nanoparticles as optoacoustic contrast agents for medical imaging
【24h】

Metallic nanoparticles as optoacoustic contrast agents for medical imaging

机译:金属纳米粒子作为医学成像的光声造影剂

获取原文

摘要

A contrast agent for optoacoustic imaging and laser therapy of early tumors is being developed based on gold nanocolloids strongly absorbing visible and near-infrared light. The optoacoustic signals obtained from gold nanospheres and gold nanorods solutions are studied. In the case of 100 nm nanospheres as an example, a sharp increase in the total area under the curve of the optoacoustic signal is observed when the laser fluence is increased beyond a threshold value of about 0.1 J/cm2. The change in the optoacoustic signal profile is attributed to the formation of water vapor bubbles around heated nanoparticles, as evidenced via thermoacoustic microscopy experiments. It has been determined that, surprisingly, gold nanoparticles fail to generate detectable nanobubbles upon irradiation at the laser fluence of ~2 mJ/cm2, which heats the nanoparticles up to 374癈, the critical temperature of water. Only when the estimated temperature of the particle reaches about 10,000癈, a marked increase of the optoacoustic pressure amplitude and a changed profile of the optoacoustic signals indicate nanobubble formation. A nanoparticle based contrast agent is the most effective if it can be activate by laser pulses with low fluence attainable in the depth of tissue. With this goal in mind, we develop targeting protocols that form clusters of gold nanocolloid in the target cells in order to lower the bubble formation threshold below the level of optical fluence allowed for safe laser illumination of skin. Experiments and modeling suggest that formation of clusters of nanocolloids may improve the sensitivity of optoacoustic imaging in the detection of early stage tumors.
机译:基于金纳米胶体强烈吸收可见和近红外光的金纳米胶体,开发了用于期光声成像和激光治疗的造影剂。研究了从金纳米球和金纳米棒溶液获得的光声信号。在100nm纳米球的情况下作为示例,当激光器流量增加超过约0.1J / cm 2的阈值时,观察到光声信号曲线下的总面积的急剧增加。光声信号分布的变化归因于加热纳米颗粒周围的水蒸气气泡,如热声学显微镜实验所证明。已经确定,令人惊讶的是,令人惊讶的是,金纳米颗粒在激光器流量的照射时不能在〜2mJ / cm 2的照射时产生可检测的纳米胶质,这将纳米颗粒加热至374,水的临界温度。只有当颗粒的估计温度达到约10,000时,才能显着增加光声压力幅度和光声信号的改变轮廓表示纳米柔臼形成。基于纳米粒子的造影剂是最有效的,如果可以通过在组织的深度可获得的低流量的激光脉冲激活。通过考虑到这一目标,我们开发了在靶细胞中形成金纳米胶体簇的靶向方案,以降低低于光学流量水平的气泡形成阈值,以便安全激光照射皮肤。实验和建模表明,形成纳米胶质簇的形成可以提高光声成像在早期肿瘤检测中的敏感性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号