首页> 外文会议>European Association of Remote Sensing Laboratories Symposium >Quality checking of DEM derived from satellite data (SPOT and SRTM)
【24h】

Quality checking of DEM derived from satellite data (SPOT and SRTM)

机译:卫星数据(SPOT和SRTM)衍生的DEM的质量检查

获取原文

摘要

The widespread availability of good quality digital elevation data opens the door to systematic and improved automation of orthoimage production, in the context of the Common Agricultural Policy and the checks on aid applications with remote sensing activity. Best practice for production of VHR ( < 1 m pixel) imagery meeting these requirements usually states a quality of 5 m RMSE in Z is required. During 2004, two sources have emerged: the "open source" SRTM C-band (3 arc second, approx. 90 m grid size) data, released to the general public via the internet and requiring careful processing, and SPOT Image's commercial Reference 3D® product, which is created using the stereo HRS sensor on the SPOT5 platform. Both data sources have official general specifications somewhat lower than the 5 m RMSE_Z, but given the usually limited relief in agricultural areas, an investigation into the quality of these dataset was considered an important task. This paper will report on the test carried out by the FOMI and JRC to determine the suitability of the SPOT Image Reference 3D® product, and the corresponding SRTM 3 arc second data, covering a single production tile (46-47° North/18°-19° East, approximately 10,000 km~2) in Hungary. The quality assessment methodology was developed at the JRC, and executed using reference data available in Hungary by FOEMI. The data set used for comparison consisted of high resolution (5 m x 5 m pixel size, RMSE_Z 0.7 m) digital elevation model derived from topographic maps at scale 1:10 000 and points of Ⅳth order triangulation network (accuracy in X,Y - 0.05 m, in Z - 0.1 m; approximately 5,000 points). For the transformation between the Hungarian EOV projection system and the international Word Geodetic System (WGS 84, EGM96 geoid) the model elaborated at FOEMI has been used. The results show that both datasets performed better than their standard specifications, and are suitable for rectification of most VHR imagery in the context of EU Common Agricultural Policy without further processing, besides projection and datum transformations.
机译:在普通农业政策的背景下,良好质量数字高级数据的广泛可用性开辟了系统的,改善了正弦生产的自动化,以及遥感活动的援助应用的检查。 vHR(<1米像素)图像的最佳实践会满足这些要求通常规定需要5米RMSE的质量。在2004年期间,出现了两个来源:“开源”SRTM C波段(3弧秒,约90米网格尺寸)数据,通过互联网向公众发布并需要仔细处理,并提供专题图像的商业参考3D ®产品,使用Stereo HRS传感器在Spot5平台上创建。两个数据来源都有官方一般规范,略低于5米的RMSE_Z,但鉴于农业领域的救济通常有限,对这些数据集的质量的调查被认为是一个重要的任务。本文将报告FOMI和JRC执行的测试,以确定点图像参考3D®产品的适用性,以及相应的SRTM 3弧形第二数据,覆盖单个生产瓷砖(46-47°北/ 18°在匈牙利的-19°东,大约10,000公里〜2)。质量评估方法是在JRC开发的,并在FOEMI中使用匈牙利提供的参考数据进行。用于比较的数据集由高分辨率(5 mx 5米像素大小,RMSE_Z 0.7 M)数字高度模型,从标尺1:10 000和ⅳ阶三角扫描网络的点(x,y的精度为0.05) m,在z - 0.1米;约5000点)。对于匈牙利eov投影系统和国际文字大地测量系统(WGS 84,EGM96大型地区)之间的转型,已经使用了在泡沫中阐述的模型。结果表明,除了投影和基准转换之外,两个数据集还优于其标准规格,并且适合在欧盟常见农业政策的背景下整改大多数VHR图像,而无需进一步处理。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号