首页> 外文会议>International Conference on Advances in Materials Technology for Fossil Power Plants >Effects of Cr and W content in high Cr ferritic heat-resistant steels on long-term creep rupture strength
【24h】

Effects of Cr and W content in high Cr ferritic heat-resistant steels on long-term creep rupture strength

机译:CR和W含量在高CR铁素体耐热钢中的影响长期蠕变破裂强度

获取原文

摘要

The effects of Cr and W on the creep rupture life of 8.5-11.5Cr steels at 650°C were evaluated. Throughout this paper the specimen composition is expressed in mass percent. The creep rupture life of 8.5Cr steel is the longest in 8.5-11.5Cr steels at 650°C under the stress of 78MPa. The creep rupture life of 9Cr steel at 650°C was extended with increasing W content. The creep strength of the modified steel, 9Cr-4W-3Co-0.2V-NbBN steel, at 650°C did not decrease sharply up to 32000h. The 10~5h creep rupture temperature of this steel under the stress of 100MPa was estimated to be approximately 635°C using Larson-Miller parameter. M_(23)C_6 type carbides and VX type carbonitrides were observed on the lath boundary of the modified steel. The stability of these precipitates in the modified steel is likely to suppress the degradation of the long term creep strength at 650°C.
机译:评估Cr和W对650℃的蠕变破裂寿命的影响。在本文中,样品组合物以质量%表示。 8.5CR钢的蠕变破裂寿命是8.5-11.5CC钢的最长,在78MPa的应力下在650°C下螺杆。随着W含量的增加,650℃的9Cr钢的蠕变破裂寿命延长。改性钢的蠕变强度为9Cr-4W-3Co-0.2V-NBBN钢,在650℃下急于急于32000h。在100MPa的应力下,该钢的10〜5H蠕变破裂温度估计使用Larson-Miller参数约为635°C。在改性钢的板条边界上观察到M_(23)C_6型碳化物和Vx型碳氮化物。在改性钢中,这些沉淀物的稳定性可能抑制在650℃下长期蠕变强度的降解。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号