首页> 外文会议>Asia-Pacific Symposium on Engineering Plasticity and Its Applications >EXPERIMENTAL STUDY ON MECHANICAL PROPERTY OF STEELREINFORCED CONCRETE L-SHAPED SHORT COLUMNS
【24h】

EXPERIMENTAL STUDY ON MECHANICAL PROPERTY OF STEELREINFORCED CONCRETE L-SHAPED SHORT COLUMNS

机译:钢筋混凝土L形短柱力学性能试验研究

获取原文

摘要

The horizontal press performance of column is deteriorated because of its special-shaped section. Moreover, because the antiseismic performance of column is worse, special-shaped column is only used in regions where seismic intensity is lower. So the main problem is to enhance the ductility and shear capacity. This test study on mechanical performance has been carried out through 14 SRCLSSC and 2 RCLSSC. The study focuses on the impacts of test axial load ratio (n,), hooped reinforcement ratio (p_v), shear span ratio (A) and steel ratio (p_(ss)) on the shear strength and the antiseismic performance of SRCLSSC. It can be concluded that the shear strength of SRCLSSC is increasing with the increasing of n, and p_(ss), but the degree of increasing is small when n_t, is a certainty value, and that the shear strength of SRCLSSC is decreasing with increasing of A; The shear resistance formula of L-shaped column is derived through tests, the calculated results are in correspondence with those of the tests. It also can be concluded that the hysteretic loops of the SRCLSSC are full and the hysteretic behaviors are improved; the displacement ductility is increasing with increasing of p_v, and p_(ss), but decreasing with the increasing of n_t; the degree of variety in high axial load ratio is larger than that in low axial load ratio. If steel bars are added, the shear strength and displacement ductility, of SRCLSSC are increased in a large degree.
机译:由于其特殊形状的部分,柱的水平压力机性能劣化。此外,由于柱的抗动动性能更差,所以特殊形状的柱仅用于地震强度较低的区域。因此主要问题是提高延展性和剪切能力。该测试研究通过14 SRCLSSC和2 RCLSSC进行。该研究侧重于测试轴向载荷比(N,),箍向加固比(P_V),剪切频率(A)和钢比(P_(SS))对SRCLSSC的抗性性能的影响。可以得出结论,随着N的增加,SRCLSSC的剪切强度随着N和P_(SS)而增加,但是当N_T时,越来越小,是一种确定性值,并且SRCLSSC的剪切强度随着增加而降低一个; L形柱的剪切性配方通过测试来推导,计算结果与测试的结果相对应。还可以得出结论,SRCLSSC的滞后环满,滞后行为得到改善;随着P_V的增加,P_V和P_(SS),位移延展性增加,但随着N_T的增加而降低;高轴向载荷比的多样性大于低轴向载荷比的程度。如果增加了钢筋,则SRCLSSC的剪切强度和位移延展性在很大程度上增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号