A THERMO-VISCOELASTIC MODEL FOR THE MODULUS OF EPOXY DURING CURE

机译：固化环氧模量的热粘弹性模型

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

The cure kinetics for a commercial epoxy have been established and the influence of the degree of cure on the glass transition determined. Time-temperature and time-conversion superposition principles have been built into a model that successfullyl predicts the development of the viscoelastic properties of the epoxy during isothermal cure from gelation to vitrification.

机译：已经建立了商业环氧树脂的固化动力学，并确定了固化程度对玻璃化转变的影响。已经建立了时间温度和时间转换叠加原理，该原理已经成功地预测在等温固化期间环氧树脂的粘弹性的发展从凝胶化到玻璃化。

著录项

来源
《Society of Plastics Engnieers annual technical conference》|1999年||共5页
会议地点
作者
Sindee L. Simon; Olivier Sindt; Gregory B. McKenna;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类非金属材料;
关键词

相似文献

外文文献
中文文献
专利

1. Toward a constitutive model for cure-dependent modulus of a high temperature epoxy during the cure [J] . Zarrelli M., Skordos A.A., Partridge I.K. European Polymer Journal . 2010,第8期

机译：建立本构模型用于固化过程中高温环氧树脂的固化相关模量
2. Improved Models of Viscosity and Relaxation Modulus for Epoxy Resin During Cure [J] . Li Huimin, Zhang Boming Polymer engineering and science . 2016,第6期

机译：固化过程中环氧树脂黏度和松弛模量的改进模型
3. Curing behaviour of IPNs formed from model VERs and epoxy systems PartII.Imidazole-cured epoxy [J] . K.Dean, W.D.Cook, P.Burchill, Polymer: The International Journal for the Science and Technology of Polymers . 2001,第8期

机译：由VER型和环氧体系形成的IPN的固化行为第二部分。咪唑固化的环氧树脂
4. A THERMO-VISCOELASTIC MODEL FOR THE MODULUS OF EPOXY DURING CURE [C] . Sindee L. Simon, Olivier Sindt, Gregory B. McKenna Plastics Bridging the Millennia . 1999

机译：固化过程中环氧树脂模量的热-粘弹性模型
5. Characterization of cure kinetics and physical properties of a high performance, glass fiber-reinforced epoxy prepreg and a novel fluorine-modified, amine-cured commercial epoxy. [D] . Bilyeu, Bryan. 2003

机译：高性能玻璃纤维增强的环氧预浸料和新型的氟改性，胺固化的市售环氧树脂的固化动力学和物理性质的表征。
6. Accurate Cure Modeling for Isothermal Processing of Fast Curing Epoxy Resins [O] . Alexander Bernath, Luise Kärger, Frank Henning 2016

机译：快速固化环氧树脂等温加工的精确固化模型
7. Modeling the effect of the curing conversion on the dynamic viscosity of epoxy resins cured by an anhydride curing agent [O] . F. Teyssandier, M. Ivanković, B. J. Love 2009

机译：对固化转化率的影响对酸酐固化剂固化的环氧树脂动态粘度的影响
8. Effect of the Extent of Cure on the Modulus, Glass Transition, Water Absorption, and Density of an Amine-Cured Epoxy. [R] . Enns, J. B., Gillham, J. K. 1983

机译：固化程度对胺固化环氧树脂的模量，玻璃化转变，吸水性和密度的影响。

A THERMO-VISCOELASTIC MODEL FOR THE MODULUS OF EPOXY DURING CURE

摘要

著录项

相似文献

相关主题

期刊订阅