首页> 外文会议>AIAA/ASME/SAE/ASEE joint propulsion conference >Thrust Performance of High Magnetic Field Permanent Magnet Type Helicon Plasma Thruster
【24h】

Thrust Performance of High Magnetic Field Permanent Magnet Type Helicon Plasma Thruster

机译:高磁场永磁型Helicon等离子体推进器的推力性能

获取原文

摘要

In order to realize long-lived electric propulsion systems, we have been investigating an electrodeless plasma thruster. In our concept, high-density helicon plasma is accelerated by a magnetic nozzle for thrust production. In order to improve the thrust performance with simple systems, high magnetic flux density magnetic nozzle formed by permanent magnets is employed to our laboratory model plasma thruster. A magnetic circuit, which has high magnetic flux density up to 0.2 T at the magnetic nozzle throat, is constructed by permanent magnets and magnetic yoke. In order to investigate the thrust performance of this thruster, the thrust force is measured by a torsion-pendulum type thrust stand. From the thrust measurement, the thrust force and specific impulse increases with the RF power input. The thrust efficiency is drastically improved by increasing the RF power input, and it is considered to be caused by the discharge mode transition from the CCP to the ICP . The maximum thrust force and thrust efficiency of 2.7 ± 0.4 mN and 0.26 % is measured when the Ar gas mas flow rate is 1.2 mg/s, and plasma production frequency and power is 13.56 MHz and 1000 W.
机译:为了实现长寿命的电力推进系统,我们一直在调查电极等离子推进器。在我们的概念中,高密度螺旋等离子通过用于推力生产磁性喷嘴加速。为了改善与简单的系统的推力的性能,由永久磁铁形成的磁通密度高的磁喷嘴被用于我们的实验室模型等离子推进器。的磁路,它具有高磁通密度高达在磁性喷嘴喉部0.2 T,是由永久磁铁和磁轭构成。为了研究这个推进器的推力性能,推力被扭转,钟摆式推力立场测量。从推力测量,推力和与RF功率输入比冲增加。推力效率急剧通过增加RF功率输入改善,并且它被认为是由来自CCP到ICP放电模式转变引起的。当Ar气体流马斯率为1.2毫克/秒的最大推力和2.7±0.4 mN与0.26%的推力效率被测量,并且等离子体产生频率和功率为13.56MHz和1000 W.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号